0709039

Series:	CLIPLINE HDFKV
Part Status:	Active
Front Panel Wire Connection:	Bolt/Screw Clamp - Wire Entry 90° to Panel
Rear Panel Wire Connection:	Bolt/Screw Clamp - Wire Entry Parallel to Panel
Width:	0.594" (15.10mm)
Panel Thickness:	0.039 ~ 0.235" (1.0 ~ 6.0mm)
Positions Per Level:	1
Panel Mount Type:	2 Piece
Pitch:	--
Voltage - UL:	600V
Current - UL:	115A
Wire Gauge:	2-8 AWG
Color:	Gray
Features:	--
Number of Levels:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Panel MountThe 0709039 type of terminal blocks are a kind of panel mount terminal blocks that have been developed to allow for the connection of conductors to another energy source in an efficient and very secure way. It is designed to provide protection against improper connections and minimize shorts. The connection of two power sources is performed through the simple assembly of two terminals on either side of the 0709039 block.The 0709039 type of terminal blocks are generally used in engineering and industrial plants where control of several electrical resources is required from a single location. They are also used in power plants, electrical equipment and other places where power connections are necessary.A terminal block consists of a body with a number of individual terminal strip portions. Each terminal strip connects one wire to another. This allows wiring to the electrical panel instead of using individual wire nuts. The addition of the terminal block can also eliminate the need for cutting conduits and using other installation methods that are time consuming.The 0709039 terminal blocks are made up of 3 metal pieces, which when fitted together, form a sealing connection in order to establish an electrical connection between the two wires. The combination clamping and screwing ensures that the connection is both secure and tight, whilst a conductor guides the wires into the terminals. This not only allows for easy installation, but also ensures that the pass-through is of a high quality.Before the terminal block is fitted to the power source, the insulation of the wires needs to be removed. The insulation must then be replaced prior to the fitting of the terminal block. It is also important to determine the correct voltage and wattage requirements as these will determine the size of the connector used for the installation.Next, the 0709039 terminal block is fitted with a rubber grommet to ensure that the type of connection being made is suitable for the type of power source being used. If the incorrect type of grommet is used, the connection may be too loose and the wires may become damaged. Once the grommet is in place, the terminal block is screwed into place, and the terminal blocks are ready to be wired.The wiring process involves connecting the two wires into the terminals of the the 0709039 terminal blocks. Once the wires are securely in place, the terminals should then be tightened up, and the grommet should be replaced with a grommet to keep dust and moisture away from the terminals.By using 0709039 terminal blocks, not only are electrical sources connected securely and safely, but it also reduces the risk of short circuits, preventing electrical fires. Moreover, the wiring process has been made much easier thanks to the use of the terminal blocks, as wiring is no longer required to be done by hand.As can be seen then, the 0709039 terminal blocks are a truly useful and invaluable piece of equipment, making it much easier and faster to connect power sources together, thereby making it easier and safer for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description