0714309268

D-Shaped Connectors - Centronics

The 0714309268 connector, commonly referred to as a D-shaped connector, is a type of connector typically used in computer, audio and video electronics applications. It is also referred to as the Centronics connector, named after the original company that developed the design.

The D-shaped connector is found on many different types of devices, including computer systems, network gear, printers, LCD displays, audio/video devices, the Apple II series of computers, and various ancient Apple peripherals. D-shaped connectors are usually found on the back of a computer system or peripheral device. The standard D-shaped connector has 13 pins or sockets, arranged in two rows, with an additional eighth pin located on the outside.

The most common application for the D-shaped connector is the parallel interface or the Centronics interface. In this application, the connector is used to connect the printer to the computer. The 13 pins are grouped into four sets of four pins. The first set of four are the Signal Ground, Ground, Data 0, and Data 7 pins, which are used for the transmission of data between the computer and the printer. The second set consists of the Data 1, Data 6, Data 2, and Data 5. The third set consists of the Data 3, Data 4, Control/Busy, and Error signals, and the fourth set of pins consists of the Input/Output select, Acknowledge, Paper end, Reset, and Init/Status signals.

The working principle of the 0714309268 connector is based on the electrical signal of the parallel interface. The parallel interface sends data in eight bits at once (one byte) over eight lines. When the transmitting device sends data, each bit is sent simultaneously over its corresponding line. The receiver then reads the data by identifying the lines that are either low or high. The transmission speed for the parallel interface depends on the printer that it is connected to, but the standard speed is around 300 baud or bits per second.

In addition to the parallel interface, the D-shaped connector is also used for a number of other applications. It can be used for various types of serial data transfer, such as RS-232 and RS-422 interfaces. It can also be used for analog video signals, such as Composite Video and Analog RGB. The connector can also be used for digital video signals, such as digital RGB and display-data channels.

The D-shaped connector is a versatile and robust connector that is commonly found in a variety of applications. It is used to transmit parallel and serial data, as well as analog and digital video signals. Its reliable and low-cost design makes it ideal for a wide range of applications, from computer networks to video displays.