0761550123

0.761.550.123 Backplane Connectors are a specialized type of connector that connects a group of electrical components across two or more parallel planes, allowing complex electrical circuits to be created without worrying about inter-cell or inter-board communication. This type of connector is typically used in very high speed applications, as the total number of wires can range from several thousand to millions. Since these types of connectors require a high degree of precision, they must be professionally installed.

The 0.761.550.123 backplane connector consists of both the port and plug components. The port is the device that is mounted onto the main board, and the plug is the device that the wires are connected to and inserted into the port. To ensure that the wires are properly inserted, the plugs must be fitted correctly into the port configuration. Depending on the application, there are a variety of configurations to choose from, such as differential or single-ended ports.

The working principle behind the 0.761.550.123 connector is simple. The port has a pin array that is connected to the plug, and each pin on the port is linked to its corresponding contact on the plug. This allows the wires to be linked in parallel, providing a low-resistance path between the pins and contacts of the port and plug. The wires are then routed through the port and connected to the main board, which connects to other electrical components.

The 0.761.550.123 connectors are designed for high speed, high power, and high density applications, such as in communications, servers, storage systems, medical devices, and automotive systems. As these connectors are designed to meet stringent standards for quality and reliability, they are usually expensive compared to standard connectors. However, they are highly reliable and can operate in extremely fast clock cycles.

In order to ensure that the 0.761.550.123 backplane connectors are properly installed, users should only use certified technicians who are trained in the design and installation of high-speed backplane connectors. Additionally, users should verify that their particular backplane connectors have been tested and certified to meet the electrical and mechanical design requirements for their specified application.