0819-08J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

The 0819-08J application field is commonly used in the manufacturing of technology products and the basic working principle behind it is in the form of an inductor. An inductor is a passive electrical component used to store energy in the form of a magnetic field. Inductors play a major role in the operation of electronic circuits and help in regulating the current.

Construction

The construction of the 0819-08J application field consists of conductors such as an iron-nickel core wound with insulated copper wire or conductive foil. As the electrical current flows through the metal core it creates a magnetic field between the windings. This stored energy will remain stored as long as the current is applied.

Applications

The 0819-08J application field is commonly used in electronics because of their high inductance and low resistance properties. It is used in a variety of applications such as filters, integrators, and phase shift networks. It can be used to separate a signal into two parts, transform alternating current (AC) into direct current (DC), and it can be used as a transformer in power supplies.

Fixed inductors are also used in AC power supplies as they can convert AC power into a form suitable for the power source. By connecting an inductor to the AC power line, the inductor stores energy from the current, smoothing the output of the power line. It can also damp voltage fluctuations and reduce the amount of noise that can enter a system.

They can also be used for protection against electrical power surges by acting as a choke to absorb any surges or spikes in power current. This helps to protect delicate electronics from being damaged by sudden surges.

Working Principle

The basic working principle behind the 0819-08J application field is based on Faraday\'s Law of Induction, which states that a change in magnetic flux will induce an electromotive force in a closed loop circuit. When a current passes through an inductor, it creates a magnetic field around it. This magnetic field is referred to as the inductance and is measured in units of Henries. This magnetic field induces an electromotive force (or voltage) in a closed circuit, which can be used to either increase or decrease the length of time of a signal.

The voltage induced in the winding depends on the rate of change of the current in the inductor. If the rate of change is gradual, then the induced voltage will be small. If the rate of change is large, the induced voltage will be large. This is the principle behind the operation of inductors, and by controlling the rate of change of the current in the inductor, the voltage can be adjusted.

The inductance of an inductor also depends on the number of turns in the winding, the size of the core, and the type of winding material. Increasing each of these will increase the inductance of the inductor. Inductors can also be made with varying numbers of windings to adjust the inductance further.

Conclusion

The 0819-08J application field is commonly used in the manufacturing of technology products. It works according to Faraday\'s Law of Induction and is a vital component in many electronic circuits. Due to its high inductance and low resistance properties, it is used in many applications such as filters, integrators, and phase shift networks. It also helps to protect delicate electronics from power surges and is used in AC power supplies to convert AC power into a form suitable for the power source.

The specific data is subject to PDF, and the above content is for reference