0850300426

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane connectors are a type of interface which are typically used to interconnect parallel printed circuit boards, often referred to as the backplane, which contains the circuit components. The most common type is the DIN 41612 which is a family of connectors defined by the Deutsches Institut für Normung (DIN), or German Institute for Standardization. The design of the connector and its construction is specific to each interface, allowing a wide range of connection types, from low-speed digital to high-speed RF interface.

The 0850300426 is a particular type of DIN 41612 backplane connector which is suited for high-speed data transfer applications and is designed with three rows, with 36 contacts. It can feature three signal levels separated by two power levels and is commonly used in test and instrumentation equipment. This connector is available in both thru hole and surface mount types, depending on the application. It also provides an attractive alternative to ribbon cables for high-speed data applications.

The design of the 0850300426 is based on a 5.08 mm (0.2 in) grid and provides a relatively compact solution. The connector consists of three wire-wrap or screw-type latching components for a secure connection and is rated for a maximum of 1.2 A. It is designed for several different kinds of signals, including DC, AC, digital, and analog signals.

The working principle of the 0850300426 is based on two primary concepts. The first is a grid pattern which divides the connector into two identically arranged rows in order to facilitate contact insertion. This is done by alternating the signal pins between two rows and then inverting the contact allocation to match the circuit connections. Thus, the two lines of pins are laid out in an opposing manner, allowing for the mating of a wide range of connectors.

The second concept behind the connector’s design is based on a sliding-block arrangement which keeps the contacts in place both at the connector and the board. This means that the contacts are secure when the connector is inserted and also keep the contacts in place during removal. This arrangement helps to give the connector a secure connection when mated to the board. The contacts slide into their designed slots and lock into place.

In addition to the sliding-block arrangement, the connector contacts are also designed to spread the load across all pins in order to ensure a secure fit. This means that the contact pins are designed to spread the pressure across all the connector pins, rather than one pin taking the majority of the stress. This also helps to reduce any wobble that may occur.

The 0850300426 is a versatile and high-performance connector which is designed for a wide range of applications. The size, reliability, and performance make it an ideal connector for test and instrumentation boards. It is also a cost-effective solution for any system that requires a secure connection for higher speed digital signals.

The specific data is subject to PDF, and the above content is for reference