0914989

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are devices used to protect circuits from the potential of overloading as well as short circuits. The 0914989 circuit breaker is a type of electrical device that helps to protect circuits from electrical overloads or other potentially dangerous situations. It works by automatically shutting off the power supply when it detects a fault condition of too much current flowing in the circuit. The 0914989 is a single phase, thermal-magnetic protector that is designed to provide reliable protection against both overcurrent and short circuit conditions.

The 0914989 uses a thermal magnetic mechanism that creates a thermal overload condition by sensing the current in the protected circuit and then activating a normally open switch which will stop the flow of current if a fault is detected. When the system is operated in a “normal” state, a small magnetic force is created which adds to the force of the internal elements, allowing the contacts to close and operate normally. When current inbound or outbound is detected above a certain threshold, the magnetic force is overwhelmed which causes the contacts to open. This action stops the passage of electric current and releases the capacitor of stored energy which is necessary for the 0914989 to work properly. The thermal overload feature is also activated when the value of the operating current exceeds the rated current for a certain period of time.

The 0914989 operates on a simplified working principle, which can be traced back to the concept of thermal cutoff. According to this concept, the 0914989 applies a heat source in the form of a voltage regulator, resistor, or a thermistor to the base of the protected component or element. This heat source senses the temperature of the component or element and will interrupt the current when the temperature exceeds the set threshold. This action helps prevent any permanent damage to the component or element due to heat caused by overcurrent.

The 0914989 is mostly used in residential homes as well as in industrial applications such as lighting systems, electronic instrumentation, motor control centers, and HVAC systems. It provides protection to these circuits by automatically isolating them upon detection of an overload or short circuit condition. Additionally, the 0914989 is designed to prevent permanent damage to the system by tripping the current flow when an overload or short-circuit situation is detected. This is achieved by the activation of the thermal overload feature, which closes the contacts of the system to disconnect the current supply.

The 0914989 is an ideal circuit breaker for residential applications due to its robust performance and reliable operation in dangerous overcurrent or short circuit conditions. It is also capable of working in extreme conditions, such as very high temperatures, in order to provide maximum protection to the connected circuits. The 0914989 is also rated for operation at a wide range of temperatures, ranging from -40°C to +90°C. As such, the 0914989 is an ideal choice for applications where extreme performance is required.

The specific data is subject to PDF, and the above content is for reference