0982681026

Series:	Premo-Flex™ 98268
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	31
Pitch:	0.049" (1.25mm)
Length:	10.0" (254.0mm)
Length - Exposed Ends:	0.157" (4.00mm)
Termination Style:	Top on One Side, Bottom on Other, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex, Ribbon Jumper Cables 0982681026 Application Field and Working Principle

Flat Flex, Ribbon Jumper Cables are one of the most common types of cabling used in many industrial projects. These cables are typically used in electricity distribution systems, automation equipment and communication networks, among others. The 0982681026 application field is vast; they are used in virtually all industries and for a multitude of purposes in some cases.The cables are usually made up of two parts; the flat flex cable and the jumper cable. The flat flex cable is usually made up of thin strands of metal, usually tinned copper, and a thin insulation coating. This cable is used to conduct the current from one component to another. The jumper cable, on the other hand, is usually made up of a thicker insulation material, and carries a higher current and voltage.The working principle of Flat Flex, Ribbon Jumper Cables is based on the fact that the current flows through the cable faster when it’s thinner and is stronger when it’s thicker. This means that when a higher voltage is applied to the cable, it increases the volume of current flowing through it. Similarly, if a lower voltage is applied, the amount of current flowing through the cable decreases. This is what allows the cables to be used safely in electrical and communications networks.In terms of safety, the Flat Flex, Ribbon Jumper Cables should be rated for the current and voltage they are intended to carry. The cables should also be insulated to prevent accidental contact with the outside of the wires. This can be done by either enclosing the whole cable in a heavy insulating material or by using dielectric tape to insulate the individual strands. The insulation should be rated for the highest voltage that it may come into contact with to ensure maximum safety.Finally, the cables should also be mechanically fastened to ensure that they remain securely in place and don’t move or vibrate, which could cause the wires to become damaged or short circuit. This can be done using mechanical fasteners, rivets or screws, or it can be done using soldering techniques.Flat Flex, Ribbon Jumper Cables are an extremely versatile cabling system and are used in virtually all electrical and communications applications across a wide range of industries. The 0982681026 application field for these cables is vast, with applications ranging from railway signaling systems to building automation systems. The working principle is based on the fact that the current flows through the cable faster when it is thinner, while stronger when it is thicker. In terms of safety, the cables should always be rated according to the current and voltage they are to carry, and they should be well insulated to prevent accidental contact with the outside of the wires and kept securely fastened in place.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description