Allicdata Part #: | 1-1393810-3-ND |
Manufacturer Part#: |
1-1393810-3 |
Price: | $ 120.02 |
Product Category: | Relays |
Manufacturer: | TE Connectivity Potter & Brumfield Relays |
Short Description: | RELAY GEN PURP |
More Detail: | Relay |
DataSheet: | 1-1393810-3 Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 109.11000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A signal relay is an electronic device that provides an electrical connection between two or more electrical circuits. Relays are used to control electrical and electronic devices and to switch circuits on and off. The 1-1393810-3 signal relay is designed for use in applications where current is up to 2 Amps.
Application field
The 1-1393810-3 signal relay can be used in numerous applications, such as:
- Control of lighting circuits
- Switching of motors
- Control of pumps
- Switching of solenoids
- Control of heating elements
The 1-1393810-3 signal relay can also be used in applications that require high-current protection such as:
- Short-circuit protection
- Over-voltage protection
- Surge protection
- Current limiting
Working principle
The 1-1393810-3 signal relay works on the principle of electromagnetism. When an electrical signal is applied to the relay, an electromagnet is energized, which in turn causes a mechanical component (such as a switch or a plunger) to move. This movement enables the relay to engage or disengage an electrical circuit.
The 1-1393810-3 signal relay is designed to be used in low-current applications such as those mentioned above. The relay is designed with a coil rated at AC up to 2A, and a contact rated at AC up to 8A. The 1-1393810-3 is a single-pole AC relay.
The main advantage of using relays in these types of applications is that they are simple, reliable, and low-cost. They are also very easy to install and maintain. Relays are also used to provide electrical isolation between two or more circuits.
The 1-1393810-3 signal relay is designed to be used in low-current applications. It is ideal for use in control circuits to switch on and off electrical and electronic devices. It is also suitable for high-current protection applications as it is designed with a coil and contact rated for AC up to 2A and 8A respectively.
The specific data is subject to PDF, and the above content is for reference
RELAY GENERAL PURPOSERelay
RELAY TELECOM DPDT 1A 24VTelecom Relay D...
RELAY GENERAL PURPOSE DPDT 1A 3VGeneral ...
RELAY GEN PURPOSE DPDT 1A 4.5VGeneral Pu...
RELAY TELECOM DPDT 2A 3VTelecom Relay DP...
RELAY GENERAL PURPOSE 4PDT 2A 3VGeneral ...