Allicdata Part #: | 1-1624200-4-ND |
Manufacturer Part#: |
1-1624200-4 |
Price: | $ 8.51 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | TE Connectivity Passive Product |
Short Description: | POT 10K OHM 1W WIREWOUND LINEAR |
More Detail: | 10k Ohm 1 Gang Linear Panel Mount Potentiometer No... |
DataSheet: | 1-1624200-4 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
500 +: | $ 7.73087 |
Series: | RW, Citec |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Taper: | Linear |
Resistance (Ohms): | 10k |
Tolerance: | ±10% |
Number of Gangs: | 1 |
Built in Switch: | None |
Power (Watts): | 1W |
Temperature Coefficient: | ±100ppm/°C |
Number of Turns: | 1 |
Rotation: | 295° |
Adjustment Type: | User Defined |
Resistive Material: | Wirewound |
Termination Style: | Solder Lug |
Actuator Type: | Slotted |
Actuator Length: | 0.630" (16.00mm) |
Actuator Diameter: | 0.250" (6.35mm) |
Bushing Thread: | 3/8-32 |
Mounting Type: | Panel Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Rotary Potentiometers, Rheostats, and the 1-1624200-4 application field and working principle are important components of any automated system. These elements are essential for a system to operate properly and efficiently. As such, it is important to understand the basics of these components and their associated uses in a variety of applications.
A Rotary Potentiometer is a specialized variable resistor. It is made of two parts. The end terminated is a flat or curved footed contact. The other end is a resistance element. When one end is touched, the resistance at the other end will be adjusted. That resistance can be used to measure specific voltage and current characteristics and actuate a system, such as a motor.
A Rheostat is a general term for a variable resistor. It consists of a resistance element that is either proportional or constant in nature. Rheostats are commonly used to adjust the voltage and current inputs of automated system components. As such, they are used to actuate various components such as motors, switches, and relays.
The 1-1624200-4 application field and working principle is highly specific to its product type. This type of sensor is specifically designed to measure torque and angular movements. The 1-1624200-4 is a slip-ring type of rheostat and is usually used as a control element for angular and linear movements in both wash cycle and other automated systems. To ensure accuracy, this type of slip-ring rheostat is usually set from 10 to 100ma.
The working principle of the 1-16242000-4 is simple. When the knob is switched on, a voltage drop is generated across the two terminals. This voltage drop will be dependent on the resistive value of the element and the type of load put on the component. Through this voltage drop, a signal can be generated that can actuate a certain amount of energy input on a load such as a motor.
In short, the 1-1624200-4 is a common component used in various automated systems. It can be used to measure and actuate certain levels of energy and torque inputs on controlled loads such as motors, switches, relays, and other components. As this type of device is usually set from 10 to 100ma, it is important to properly calibrate and test the component to ensure accuracy and safety.
The specific data is subject to PDF, and the above content is for reference
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...