1-1744128-1

Series:	Power
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Contact Type:	Non-Gendered, Right Angle
Contact Termination:	Solder, PCB
Wire Gauge:	--
Contact Material:	Copper
Contact Finish:	Tin
Contact Finish Thickness:	--
Type:	Stamped

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Blade Type Power Connectors – Contacts

Blade type power connectors, also known as bulb type power connectors, are a general purpose electrical connector used for various low power applications, which primarily use blade contacts for power and signal connection and requires less space compared to other type of connectors. The 1-1744128-1 is one of the most common blade type connectors, and it is mainly used for telecom and network applications, as well as in industrial machinery and general electronics.

Design and Features of 1-1744128-1

The 1-1744128-1 is a two-piece connector, consisting of a pair of two-pole blade contacts and a dielectric sleeve. It is designed to connect two circuit lines that carry different voltage levels or current levels at opposite ends. The blades are made from stainless steel, and feature a low profile and bent-up end for superior insulation and strain relief. The connector also features pre-assembled stranded wires in two-wire cable lengths of various lengths, allowing easy installation and wiring.The 1-1744128-1 blade has a rated current of 1.2A, and can operate at temperature ranges of -40℃ to +105℃. The 1-1744128-1 blade is also corrosion-resistant and rated up to 1000 mating cycles.

Application Field and Working Principle

The 1-1744128-1 is most commonly used in telecom and network applications, such as in fiber optical systems, Internet Protocol (IP) networks, and consumer electronics. It is also suitable for industrial machinery, medical equipment, and automotive applications. The connector is designed to provide fast and secure connection between two electrical lines, while reducing the risk of electrical disturbance and short circuits.As the name suggests, the 1-1744128-1 works on a blade-type principle. This means that the two electrical lines are connected together at the blade’s tip by a contact which passes through a dielectric sleeve designed to protect the electrical connections from dirt, heat, corrosion, and other environmental factors. The contact is then fastened with a recessed fastener on the opposite side of the blade. This arrangement ensures reliable and secure connection between the wires.

Installing and Maintenance Tips

When installing and replacing the 1-1744128-1, make sure to observe proper safety precautions as faulty connections may cause serious damage to equipment and lives. Use of the proper tools and adhering to the wiring guidelines provided by the manufacturer are important. Make sure that the contacts are properly aligned and screwed tightly into place.Maintenance and cleaning of the 1-1744128-1 should be performed on a regular basis. Dust should be removed by blowing off the contacts as it accumulates. Heat sinks should be checked for any signs of corrosion. Damaged contacts must be replaced immediately.

Conclusion

The 1-1744128-1 blade type power connector is a versatile and reliable solution for low power applications. It is easy to install and maintain, and is well-suited to telecom and network, industrial, medical, and automotive applications. However, users should observe safety precautions and follow the instructions provided by the manufacturer.

The specific data is subject to PDF, and the above content is for reference