Allicdata Part #: | 1-1985204-3-ND |
Manufacturer Part#: |
1-1985204-3 |
Price: | $ 10.52 |
Product Category: | Connectors, Interconnects |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | CONN FIBER MT-RJ PLUG SIMPLEX |
More Detail: | Fiber Optic Plug Connector MT-RJ Simplex Slate |
DataSheet: | 1-1985204-3 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
100 +: | $ 9.56438 |
Series: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Connector Style: | MT-RJ |
Moisture Sensitivity Level (MSL): | -- |
Connector Type: | Plug |
Simplex/Duplex: | Simplex |
Mode: | Multimode |
Fiber Core Diameter: | -- |
Fiber Cladding Diameter: | -- |
Cable Diameter: | -- |
Mounting Type: | Free Hanging (In-Line) |
Fastening Type: | Latch Lock |
Housing Color: | Slate |
Boot Color: | Beige |
Ingress Protection: | -- |
Features: | Protective Cap, Strain Relief |
Attenuation - Typ: | -- |
Reflection: | -- |
Housing Material: | Thermoplastic |
Ferrule Material: | Plastic |
Body Material: | Thermoplastic |
Operating Temperature: | -- |
Mating Cycles: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Fiber Optic Connectors: 1-1985204-3 Application Field and Working Principle
The 1-1985204-3 connector is a type of fiber optic connector that is compatible with the FDDI-approved 4-contact fiber optic cable. This high-performance connector uses metalized optical-fiber-end pieces with metalized-fiber ferrule and plastic end functions to connect to the optical fiber. It also employs a conventional physical contact design connection and is extremely popular among networks applications.
The main application field of 1-1985204-3 connector is in FDDI/CDDI networks. Fiber Directive Distributed Interface (FDDI) and Copper Directive Distributed Interface (CDDI) are two of the most popular protocols for local area networks. FDDI and CDDI both use a fiber optic physical layer using the 1-1985204-3 connector. The 1-1985204-3 connector has also been used with FB-PDH (fiber-based point-to-point digital hierarchy) and FD-PPB (fiber-based point-to-point peripherals) systems.
The working principle of 1-1985204-3 connector is quite simple. When used with compatible 4-contact fiber optic cable, the 1-1985204-3 connector mates the fiber ends together through the metalized optical-fiber-end pieces with metalized-fiber ferrule and plastic end functions. This creates an electrical connection between the two ends of the fiber for signal transmission. It is important to note that the metalized portions of the connector should not touch each other during installation as this could cause an electrical connection to form, resulting in short-circuiting the signal.
The 1-1985204-3 connector is popular in fiber optic networks because of its fast installation time and low cost. It is also relatively easy to install and maintain. It is well suited to networking applications as it offers good signal integrity. Additionally, the robust construction and high performance ensure reliable performance over long periods of time.
In conclusion, the 1-1985204-3 connector is a reliable and cost-effective solution for fiber optic network applications. It provides a secure physical connection between the fiber ends and offers good signal integrity. Additionally, its fast installation and robust construction make it a popular choice for fiber optic networks.
The specific data is subject to PDF, and the above content is for reference
CONN FIBER SC PLUG DUPLX 127UMFiber Opti...
CONN FIBER SC PLUG SMPLX 127UMFiber Opti...
CONN FIBER SC PLUG SMPLX 125UMFiber Opti...
CONN FIBER PLUG SMPLX 1000UMFiber Optic ...
CONN FIBER PLUG SMPLX 1000UMFiber Optic ...
CONN FIBER PLUG SMPLX 1000UMFiber Optic ...