1-292215-3 Datasheet/PDFThe 1-292215-3 is a key component of the rectangular connector and adapter family of products. This type of device is a rectangular-shaped connector that allows two or more electrical components or systems to be connected to one another. It is typically used to create a common terminal point between two or more conductors in communication or power systems.
The rectangular connector and adapter family has several subtypes of connectors, with the 1-292215-3 being a common subtype. In general, the 1-292215-3 is a slim-line rectangular connector with a flat rectangular body and four pins (two long and two short) that are placed in a recessed groove on the connector. The four pins are typically grouped into two rows (top and bottom) and have a similar shape, but slightly different lengths. The four pins are then connected to the external electrical system.
Application Field and Working Principle of 1-292215-3:
The 1-292215-3 rectangular connector and adapter is primarily used for high-volume connections. It is most commonly used for blanking and powering multiple systems, primarily in industrial and military applications. It is designed to be both cost-effective and reliable in operation, with an expected service life of over 30 years. It can support a wide range of connections, ranging from two of the four pins into a single output connection with just over twice the current capacity of the other two pins.
The working principle of the 1-292215-3 is quite straightforward. When two or more components need to be connected, the pins of the connectors are arranged in such a way that the pins of one component are aligned with the slots in the other component. This ensures a secure connection between the two components. The pins are then pushed down, and the connector locks into place. Once connected, the electrical current can flow through the pins and from the devices to its respective locations in either circuitry.
The 1-292215-3 also features environmental protection features, such as an internal sealant that prevents the ingress of moisture, dust, and dirt from entering the connection. This is particularly important in harsh and corrosive environments, as it ensures the connection will stay reliable for long-term use. Additionally, the pins have a polarity indicator to indicate which pins of the connector should be connected to which components.
Conclusion:
The 1-292215-3 is an essential component in the rectangular connector and adapter family. It is used to connect multiple devices or electrical circuits, both cost-effectively and reliably. Its four pins are arranged in two recessed rows to ensure a secure connection that will not be easily disconnected, and its environmental features make it suitable for use in even the harshest of conditions.