1-390263-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Sockets for ICs, transistors and other components are one of the most common devices used in electrical engineering. They allow for easy connection of current and voltage sources to the electronic circuit, often providing a simple way to control devices such as motors, terminals, and LEDs. This article explains the application field and working principle of the universal 1-390263-1 socket, a widely popular and versatile device used for a variety of electronics applications.

The 1-390263-1 socket is a three-pin terminal device. It is designed with two symmetrical pins connected to the ground line, and one central pin that is connected to a current source. This configuration allows the socket to be used in two different ways. The first is to directly connect a voltage source, such as a battery or DC power supply, to the central pin. The second is to connect a terminal that can control the current, such as a transistor, to the central pin.

One of the most common applications of the 1-390263-1 socket is for controlling the power supply to a certain section of an electronic circuit. By connecting the TIP-110 transistor to the central pin and the ground to the sides, the device can be used to control the power supply to a specific set of components. This allows the device to switch on or off power to the connected components, depending on a signal received from the control transistor. This is useful when electronics devices must be powered on and off in certain situations, such as when sensors or other devices are triggered.

The 1-390263-1 socket can also be used to protect components in an electronic circuit against high voltage surges. By connecting the safety resistor to the central pin and the ground to the sides the socket will be able to provide protection to the connected components. This is especially useful in applications where high voltages are involved, such as in power grids, lighting, or electric motors.

Another application of the 1-390263-1 socket is for buffering. It is not uncommon for transistors or ICs used in an electronic circuit to be overdriven if excess current is supplied. Using the 1-390263-1 socket with a resistor and diode in series helps to protect the components against overdriving. This can help prevent potential damage to other components in the circuit.

Finally, the 1-390263-1 socket can be used to connect two pieces of equipment in a serial configuration. This type of configuration is often used in industrial automation applications. By connecting two pieces of equipment, each using a different voltage, the socket can be used to provide a bridge between the two pieces of equipment. This is useful for controlling the operation of the connected equipment in an automated fashion.

In conclusion, the 1-390263-1 socket is a versatile and adaptable device that can be used in a variety of applications. Its three pins provide a simple way to connect current and voltage sources to an electronic circuit, allowing for the easy control of devices such as motors, terminals, and LEDs. It can also be used in a variety of safety and buffering functions, as well as for connecting two pieces of equipment in a serial configuration. This socket is a popular component among electrical engineers, and it’s no surprise why.

The specific data is subject to PDF, and the above content is for reference