1-552076-1 Connectors, Interconnects |
|
Allicdata Part #: | A1506-ND |
Manufacturer Part#: |
1-552076-1 |
Price: | $ 2.35 |
Product Category: | Connectors, Interconnects |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | STR/REL COVRKIT 180DEG 24CON 2PC |
More Detail: | 24 Position Two Piece Backshell Connector Black 18... |
DataSheet: | 1-552076-1 Datasheet/PDF |
Quantity: | 4 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 2.12940 |
10 +: | $ 2.04435 |
25 +: | $ 1.87387 |
50 +: | $ 1.78857 |
100 +: | $ 1.70346 |
250 +: | $ 1.49050 |
500 +: | $ 1.44793 |
1000 +: | $ 1.23500 |
2500 +: | $ 1.14983 |
Series: | CHAMP |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Accessory Type: | Two Piece Backshell |
Moisture Sensitivity Level (MSL): | -- |
Number of Positions: | 24 |
Cable Type: | Round |
Cable Exit: | 180° |
Shielding: | Unshielded |
Material: | Polyphenylene |
Plating: | -- |
Hardware: | Strain Relief |
Features: | -- |
Color: | Black |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
D-Sub, D-Shaped Connectors - Backshells, Hoods are a type of electrical connector. They are composed of rectangular-shaped metal shells that form the outside of the connector and a plastic insulator inside the shells that holds the metal contacts in place. The shells on either side of the connector are designed to prevent water and dust from entering the interior of the connector. The shells also provide support and protection to the electrical components, as well as providing a secure connection between the two parts.
The shells are usually made from aluminium or steel, but can also be made from plastic. The size of the shells depends on the size of the connector, ranging from mini to large-scale. The shells are available in a variety of colors, and can be used for both low and high-voltage applications. The backshells and hoods are available in a variety of sizes, allowing for a wide range of applications.
The 1-552076-1 application field and working principle of D-Sub, D-Shaped Connectors - Backshells, Hoods is quite simple and reliable. First, the connector is mounted onto the desired panel or surface. Then the connector’s contacts are soldered on the back of the connector, making sure that the connection is secure. After the soldering is complete, the shells are connected to the female connector, forming an environmental seal. Finally, the shell and hood are fastened together with screws.
The typical working principle of a D-sub electrical connector, particularly 1-552076-1 application field and working principle, is fairly simple. The purpose of the D-Sub electrical connector is to connect two components together, providing power and data transfer between them. To do this, the contacts inside the connector are soldered to the printed circuit board or harness, and the shells of the connector are mated with the female connector. The shells form an environmental seal to keep out outside influences, and they also provide strain relief for the contacts. The hood provides additional strain relief and also prevents foreign matter from entering the connector.
D-Sub, D-Shaped Connectors - Backshells, Hoods are designed to provide dependable electrical connections for a variety of applications and environments. They’re also easy to assemble and install, and are available in a wide range of sizes and styles. The variety of features and configurations available ensures that there’s a D-Sub connector suitable for almost any situation or application.
The specific data is subject to PDF, and the above content is for reference
BACKSHELL 68POSPosition Connector
CONN HOOD 68PINPosition Connector
CONN HOOD 80PINPosition Connector
DSUB JUNCTION SHELLPosition Connector
CONN BACKSHELL 50POS C/W 4-4050 Position...
FCT HOOD S1 70 DEG SHLD PLSTC W/9 Positi...