1-84534-8

Cable End Type:	Tapered
Mating Cycles:	--
Actuator Color:	--
Housing Color:	White
Contact Finish Thickness:	--
Current Rating:	1A
Material Flammability Rating:	--
Operating Temperature:	-40°C ~ 85°C
Voltage Rating:	50V
Features:	--
Actuator Material:	--
Housing Material:	Polybutylene Terephthalate (PBT), Glass Filled
Contact Finish:	Tin
Contact Material:	Phosphor Bronze
Series:	--
Locking Feature:	--
Height Above Board:	0.307" (7.80mm)
FFC, FCB Thickness:	0.30mm
Termination:	Kinked Pin
Pitch:	0.049" (1.25mm)
Number of Positions:	18
Connector/Contact Type:	Contacts, Vertical, 1 Sided
Mounting Type:	Through Hole
Flat Flex Type:	FFC
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction To FFC, FPC ConnectorsFlat flexible connectors (FFC) are a type of electrical connector comprised of a thin conductive ribbon made from a flat sheet of conductive material, usually copper, and connected at both ends by solder or a similar method. FFCs provide a low-cost, reliable method of making electrical connections between two locations. They are commonly used for a variety of applications, including data transmission, automotive applications, consumer electronics, and medical systems.These types of connectors are often used in applications where there is a need for a low-cost, reliable electrical connection in a compact area. They are often used in applications where obstacles, such as walls, are present. They can also be used to connect components that are in different areas, such as in a laboratory set-up. FFC DesignFFC connectors are typically composed of a flat strip of metal, such as copper, with contacts spaced evenly along its length. The contacts are usually made of gold or silver. The connectors are typically held in place on the board by small rivets or clips, allowing for easy installation and removal.The two ends of the connector are soldered onto the board. This is done using a soldering iron to heat the connector and then attaching it to the board using a soldering bullet, or a special type of contact that is typically pressed onto the connector. The contacts can be located on the top or bottom side of the FFC connector. The contacts can also be arranged in four different ways: along the top edge, along the bottom edge, in two rows, or in a single row (called the “tape-out”). FFC ApplicationsFFC connectors are typically used in a variety of applications, such as consumer electronics, automotive, data communication, medical systems, and industrial applications. In consumer electronics, FFC connectors are used for various devices, such as stereo systems, cameras, tablets, and video game consoles. These devices require a reliable electrical connection to operate properly and FFC connectors provide a low-cost solution for achieving this.In automotive applications, FFC connectors are used for a variety of purposes, such as connecting switches, sensors, relays, signal wires, and power lines. FFC connectors are also used in data communication and telecommunications, as they provide a reliable, low-cost method of transferring data between devices. FFC connectors are also used in medical systems for a variety of applications. They can be used to connect devices such as electrocardiograms, monitors, and other medical equipment. In industrial applications, such as robotics, FFC connectors are used to connect components such as motors, switches, and sensors. 1-84534-8 Application Field and Working PrincipleThe 1-84534-8 flat flexible connector is a type of connector that is typically used in the automotive and medical fields. It is a small, low-cost connector that is a good choice for applications where space is tight and reliability is important.The 1-84534-8 connector consists of a flat strip of copper contacts with multiple solder contacts along its length. The contacts are usually located on top or bottom of the connector for ease of installation. The contacts can be arranged in four different ways: the top edge, the bottom edge, in two rows, or in a single row (called the “tape-out”). When connecting two components, such as a switch and a motor, the two components are placed onto the board and the 1-84534-8 connector is then placed between the two components. The contacts are soldered onto the board using a soldering iron and then the connector is held in place by small rivets or clips. Once the connector is secured in place, the two components are connected by inserting the two ends of the connector until they are securely attached. The connection is then complete. The 1-84534-8 connector is a reliable and low-cost solution for connecting two components in a space-constrained environment, where the need for a reliable electrical connection is paramount.

The specific data is subject to PDF, and the above content is for reference