1-87632-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Headers, Male Pins are the most commonly used type of electrical connector, and are designed to carry a variety of signals and power. They may be pre-assembled with wires, wires and terminals, or terminals alone. Depending on their use, headers and male pins are available in a range of sizes, types and configurations.

Specific to 1-87632-4 application field and working principle, headers are long strips of spaced holes where the female part of the connector is inserted. On one side, the header block is soldered to the board; on the other side, wires or other components are soldered. Male pins are short metal pins which are inserted into the corresponding holes in the header block, making electrical contact between the boards.

The 1-87632-4 Header and Male Pins are available in a range of sizes and configurations, from the standard DIN 41612 mode F, the most commonly used connector, to other DIN standards such as C12 or 41617. They are often used in applications including industrial control, robotics, and automotive, among others. The most common types of the 1-87632-4 Header and Male Pins are 3-row and 4-row, as well as 5-row and 6-row connectors with different pin and row configurations.

In terms of their working principle, 1-87632-4 Headers and Male Pins use a common term called "plug and plug" connection. The header is attached to one board and the male pin is attached to a mating board. When the male pin is inserted into the female socket, it completes the electrical circuit between the two connectors. As well as providing electrical connectivity, 1-87632-4 Header and Male Pins can also provide mechanical support and secure mounting for other electronic components.

1-87632-4 Header and Male Pins are particularly useful in applications where it is necessary to disconnect and connect two boards several times during the lifetime of the system. The typical mated size of the 1-87632-4 Header and Male Pins range from 2.54mm to 12.85mm. The pins are robust enough to withstand rugged conditions and are usually protected by a boot or clip. For further protection, the header can be soldered onto the board.

1-87632-4 Header and Male Pins are low cost, space saving and offer a high degree of reliability making them ideal for many applications. The combination of these attributes makes them well suited for mass production in applications such as automotive, consumer electronics and medical instruments.

In conclusion, the 1-87632-4 Header and Male Pins are a popular choice for many applications due to their robustness, cost-effectiveness, and reliability. They are available in a range of sizes and configurations and are suitable for both low-volume and high-volume production. Their simple plug and plug design makes them easy to install and repair, while their wide range of power and signal connectors makes them suitable for use in a range of industries.

The specific data is subject to PDF, and the above content is for reference