10-89-2501

Introduction

Rectangular connectors - headers, male pins, 10-89-2501 is a special type of header pin used for connecting boards together in a circular pattern. This type of connectors is commonly used in computer applications and telecommunications equipment, but may be used in other applications as well. This article will discuss the application field and working principle of 10-89-2501 rectangular connectors - headers, male pins.

Application Field

10-89-2501 rectangular connectors - headers, male pins, are typically used in two types of applications: computer applications and telecommunications applications. These connectors are used to connect different boards together, such as circuit boards or motherboards. They are made of copper or aluminum and are designed to be very durable and reliable. In computer applications, these type of connectors are typically used for data transmission or communication within a computer system. In telecommunications applications, they are used to connect different terminals in a communications network, such as those used for cell phone towers.

Working Principle

The working principle of 10-89-2501 rectangular connectors – headers, male pins, is that they create a circular pattern of pins and connect two boards together. Each pin is made of copper or aluminum, and is then soldered and connected to the other board. The circular nature of the pins creates a reliable connection, as each pin is slightly insulated from the other. This in turn ensures that any signals entering or leaving the connector will not be distorted or lost. In order for the connections to be made properly, the pins must be cleaned and checked for corrosion. This is usually done by using a flux paste and flux cored solder.

Conclusion

10-89-2501 rectangular connectors - headers, male pins, are a reliable, durable connecting solution for computer and telecommunications applications. They create a circular pattern of pins that helps ensure that signals entering or leaving the connector are not lost or distorted. The pins are usually made of copper or aluminum and must be carefully checked for corrosion in order for the connection to be successful. Overall, these type of connectors offer a reliable, cost-effective solution for connecting boards together.