10-CBSA-0.5X6.0X0.13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields – 10-CBSA-0.5X6.0X0.13 Application Field and Working Principle

RF shields are devices designed to protect electronic circuits from external radiation as well as to protect external equipment from the electromagnetic radiation generated by a device. Depending on the specific application, the type of shield used may differ. The 10-CBSA-0.5X6.0X0.13 shield is an example of one such device and is designed to protect sensitive electronics devices from radiation produced from a wide range of sources including radio frequencies (RF) energy. This article will discuss the application field and working principle of the 10-CBSA-0.5X6.0X0.13 RF shield.

The 10-CBSA-0.5X6.0X0.13 is an example of an RF shield designed for use in an ultra-low-noise environment. It is an EMI / RFI shield which is designed to protect sensitive electronics from radiation emitted by sources such as mobile phones, handheld radios, and Wi-Fi devices. Because of its EMI / RFI protection capabilities, it is ideal for applications in mission-critical areas such as healthcare, aerospace, and defense. It is also suitable for non-mission-critical applications such as consumer electronics and telecommunications.

The 10-CBSA-0.5X6.0X0.13 shield consists of a high-frequency absorber and a conductive plate. The absorber is composed of a special Nickel Zinc alloy which provides increased EMI/RFI shielding by absorbing RF energy. The metal conductive plate is composed of an aluminum alloy and helps dissipate heat which helps keep the device cooler. The combination of the two elements allows the shield to provide efficient, effective protection from radiation.

The working principle of the 10-CBSA-0.5X6.0X0.13 shield follows a simple rule. When an electromagnetic wave strikes the shield, the high-frequency absorber in the shield absorbs the energy and converts it into heat. This process reduces the signal to noise ratio which reduces the amount of unwanted interference. The conductive plate then dissipates the heat, preventing the device from becoming overwhelmed with RF energy.

In order to use the 10-CBSA-0.5X6.0X0.13 shield effectively, proper installation is important. The shield must be mounted so that the front face of the shield is towards the source of the radiation. Additionally, the shield must not be physically obstructed by any other materials or object. Proper ground connection to the shield must be also provided in order to ensure the greatest amount of EMI/RFI protection.

The 10-CBSA-0.5X6.0X0.13 shield is an effective and reliable way to protect sensitive electronics from radiation produced by a wide range of sources. Its EMI / RFI shielding capabilities make it a suitable option for a variety of industries. To ensure maximum protection, proper installation of the shield is essential and must be done in accordance with the manufacturer’s instructions.

The specific data is subject to PDF, and the above content is for reference