10-CBSA-0.75X3.5X0.13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields, used in a variety of industries, are devices specially designed to keep unwanted radio frequency signals from interfering with desired signals of the same type. The 10-CBSA-0.75X3.5X0.13 is one such RF Shield, and it is designed for applications that require a high degree of interference shielding. This shield is made of a special combination of dielectric and metallic material, and offers a number of features which make it an ideal choice for applications in the RF shielded environment.

In order to understand the 10-CBSA-0.75X3.5X0.13 application field and working principle, it is important to understand the principles behind RF shielding. First of all, the shield is used to block or reduce the incoming and outgoing electromagnetic interference (EMI). This can be done by either absorbing the energy of the signal, deflecting it away, or reflecting it back. In the case of the 10-CBSA-0.75X3.5X0.13, it works by using both absorption and deflection of the EMI, and is designed to provide a high level of EMI protection. The primary purpose of the shield is to prevent unwanted signals or interference from entering or emanating from the sensitive component, or system, that it is protecting.

To achieve this purpose, the 10-CBSA-0.75X3.5X0.13 uses a number of features. Firstly, the shield is designed to absorb a large percentage of the incident radiation. This is done through the use of the special combination of dielectric and metallic material. The 10-CBSA-0.75X3.5X0.13 shield is made up of two layers. One layer is made of a dielectric material which is designed to absorb microwaves, while the other layer is made of a conductive material which is designed to deflect the incoming and outgoing EMI.

The 10-CBSA-0.75X3.5X0.13 also has a unique design which helps to redirect the EMI away from sensitive components inside the system. This is done with the help of a deflector which is used to deflect the EMI away from the protective shield. The deflector is designed to send the incoming and outgoing EMI in different directions, thus preventing it from directly affecting the sensitive components inside the system.

Furthermore, the 10-CBSA-0.75X3.5X0.13 shield can also be used to create a Faraday cage. This is a type of barrier which is designed to trap EMI. It is made up of a conductive material which creates a barrier which prevents EMI from entering or leaving the system. The Faraday cage is useful in preventing both high frequency and low frequency radiation from entering the system, as it can block both types of radiation depending on the design parameters.

The 10-CBSA-0.75X3.5X0.13 is a highly effective shield for use in a variety of applications, where the control of interference is a serious concern. It is designed to shield against both low and high frequency radiation, and is an effective way to prevent the intrusion of unwanted signals or interference into sensitive components. The combination of its absorptive and deflective properties makes the 10-CBSA-0.75X3.5X0.13 an ideal choice for applications in the RF shielded environment.

The specific data is subject to PDF, and the above content is for reference