Allicdata Part #: | 10-CBSA-1.25X5.0X0.13-ND |
Manufacturer Part#: |
10-CBSA-1.25X5.0X0.13 |
Price: | $ 15.05 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 10 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 1.250" (31.75mm) X 5.000... |
DataSheet: | 10-CBSA-1.25X5.0X0.13 Datasheet/PDF |
Quantity: | 1000 |
22 +: | $ 13.68300 |
Series: | 10-CBS |
Packaging: | Bulk |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.130" (3.30mm) |
Length - Overall: | 5.000" (127.00mm) |
Width - Overall: | 1.250" (31.75mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields are components typically used in consumer electronics to reduce the potential of interference and control power response from further electronic devices. The most common Shielding includes Faraday cage, magnetic shielding and primary and secondary partition. 10-CBSA-1.25X5.0X0.13 is one type of RF Shield that is particularly effective in controlling EMI. This shield has a wide range of applications from medical and defense to consumer and communication devices.
The 10-CBSA-1.25X5.0X0.13 shield is designed to provide EMI suppression within a specific frequency range. It operates on a principle of grounded metallic shielding, through which electric fields can be both inhibited and conducted. This shield has been developed to provide cost efficient solutions for existing and new circuit board designs, as it does not require any additional components or hardware.
The 10-CBSA-1.25X5.0X0.13 shield is composed of a metallic shield that is placed perpendicularly around a signal sensitive component on a circuit board. This shield then creates a Faraday cage which blocks electric fields by reflecting them or by conducting them to ground. The Faraday cage is effective at frequencies between two and four GHz, and is ideal for low-power applications such as medical and communication systems. as the electric fields have to be conducted through the metallic shielding, they must first pass through the conductive layer, thereby reducing the amount of EMI produced.
The 10-CBSA-1.25X5.0X0.13 shield is ideal for applications such as Wi-Fi networks, phones, tablets, and other consumer electronics. The effectiveness of this shield depends on the level of conductivity of the metallic shielding, and this in turn depends on the shielding material used. For applications that require higher levels of shielding, an additional layer of magnetic shielding can be used to maximize performance.
The 10-CBSA-1.25X5.0X0.13 shield is a cost-effective EMI solution that has a wide range of applications. The Faraday cage design allows the shield to protect against both electric and magnetic fields while providing a cost-effective solution to reducing EMI. The shield is ideal for low-power applications such as medical devices and communication systems, and is also suitable for use in consumer electronics. With the use of a magnetic shield, the 10-CBSA-1.25X5.0X0.13 shield provides effective EMI suppression and can be used to reduce interference and control power response from further electronic devices.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...