Series:	10-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.130" (3.30mm)
Length - Overall:	4.500" (114.30mm)
Width - Overall:	3.000" (76.20mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

10-CBSA-3.0X4.5X0.13 Applicatin Field and Workiing Principle

RF Shields are components that are designed to reduce the propagation of radio frequency. This type of component belongs to the category of electromagnetic interference shielding, and is often used to reduce the amount of interference between electronic devices, including radios, computers, telephones, etc. The 10-CBSA-3.0X4.5X0.13 is an example of one such RF Shield. The 10-CBSA-3.0X4.5X0.13 is designed to limit the transmission of high-frequency signals. This component works by reflecting incoming high-frequency signals, which prevents them from reaching their intended frequencies and causes them to be redirected away from the device. This type of RF Shield is used in a variety of applications, including industrial electronics, military and aerospace applications, and consumer products. It is often used in the construction of enclosures for electronic devices and components, providing a physical barrier to reduce the amount of interference that can occur. The 10-CBSA-3.0X4.5X0.13 is also used in the production of antennas, providing a further layer of protection against unwanted noise.The 10-CBSA-3.0X4.5X0.13 is manufactured from copper alloy materials, which are designed to optimize the reflection and absorption of incoming high-frequency signals. The component is designed so that it reflects signals in the 0-4.5GHz frequency range, but is also capable of handling frequencies up to 8GHz, depending on the application.In order for the 10-CBSA-3.0X4.5X0.13 to operate effectively, it must be coupled with a dielectric surface on the inside of the RF Shield. The dielectric surface needs to be chosen based on the frequency range of the incoming signal, and serves to further attenuate the signal as it passes through the RF Shield. This reduces the amount of signal that is detected by the receiving device, as well as the amount of interference that is caused by the signal to other devices in the vicinity.The 10-CBSA-3.0X4.5X0.13 can also be used in conjunction with other components, such as EMC absorbers. These components have a similar function to the dielectric surface, and are designed to further absorb any incoming signals, thus further reducing the impact of the signal on the environment. The 10-CBSA-3.0X4.5X0.13 is an effective and reliable RF Shield that has a wide variety of applications. It is able to reduce the amount of interference that can be caused by high-frequency signals, and is a reliable solution to protecting against interference from a variety of sources. Furthermore, it is easy to install and can be used in conjunction with a variety of other components to further reduce the amount of noise in a given environment.

The specific data is subject to PDF, and the above content is for reference