10-CBSA-3.75X5.25X0.13

Series:	10-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.130" (3.30mm)
Length - Overall:	5.250" (133.35mm)
Width - Overall:	3.750" (95.25mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IntroductionRF Shields are designed to help manage the transmission and reception of electromagnetic radiation. In general, these devices are designed to reduce the amount of RF energy that can escape a given enclosed space. The 10-CBSA-3.75X5.25X0.13 is an example of an RF Shield that has specific applications in the field. Understanding the application field and the working principle of this device is important for getting the most out of its use and for understanding its limitations.Application FieldThe 10-CBSA-3.75X5.25X0.13 RF Shield is most commonly used in industrial installations where there is a desire to reduce the amount of RF radiation that can escape or enter the area. This type of shielding is designed to provide a low-cost protection solution for most commercial and industrial areas. The shield is most commonly used in areas where the level of RF radiation is significant, such as near transmitters and antennas.The 10-CBSA-3.75X5.25X0.13 also has applications in consumer electronic devices. The shield can be used to reduce the amount of RF radiation that is emitted by electronic devices, such as cell phones, computers, and routers. This type of shielding can also be used in small electronic devices, such as game consoles, iPods, and laptop computers.Working PrincipleThe 10-CBSA-3.75X5.25X0.13 works by absorbing and reflecting, rather than blocking, the RF radiation that is emitted in the area. This type of shielding works by surrounding the device or area with a conductive metal enclosure. Since the metal is conductive, it absorbs and reflects much of the RF energy that is emitted within the area. As a result, much of the RF energy is prevented from passing through the enclosure and escaping into the environment, or from entering the protected area.The 10-CBSA-3.75X5.25X0.13 also uses a combination of absorbers and reflectors within the metal enclosure in order to maximize the effectiveness of the shield. The absorbers are designed to absorb any RF energy that passes through the metal enclosure and thus reducing the amount of radiation that escapes into the environment. The reflectors are designed to bounce any RF energy that tries to enter the area back into the environment before it can enter the protected area.ConclusionThe 10-CBSA-3.75X5.25X0.13 is a type of RF Shield that has specific applications in the field. This type of shield is most commonly used in industrial installations and consumer electronic devices where it is necessary to reduce the level of RF radiation that can escape or enter the area. The shield works by absorbing and reflecting the RF radiation, rather than blocking it, and it also uses a combination of absorbers and reflectors in order to maximize the effectiveness of the shield.

The specific data is subject to PDF, and the above content is for reference