10-CBSA-4.0X5.5X0.13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields are used to protect electrical components from the effects of RF interference. The 10-CBSA-4.0X5.5X0.13 shield is a conductive shield designed to be used in a wide variety of applications, including military, commercial and industrial electronics. It is designed to be mounted over electrical components to provide protection from a wide range of RF frequencies.The 10-CBSA-4.0X5.5X0.13 shield is made from an advanced conductive material, which is designed to attenuate a wide range of RF signals in the frequency range of 2MHz – 18GHz. The shield is constructed with highly conductive folded edges to provide a low-impedance path for the RF energy to travel through, thus providing a high level of shielding.The 10-CBSA-4.0X5.5X0.13 shield is designed to be used in a variety of applications, including in automotive, aerospace, telecommunications and data networks, industrial process equipment, instrumentation, medical and consumer electronics. The shield can be used to protect both active and passive components from RF interference, as well as providing a protective cover to reduce EMI radiation from the components.The 10-CBSA-4.0X5.5X0.13 shield is designed to provide high levels of protection from both common and uncommon types of RF interference. The shield effectively attenuates common sources of interference, such as cellular, radio, television and Wi-Fi signals, as well as more complex digital signals such as GPS and Satellite signals. The shield also provides effective protection from radar and high-frequency interference.When mounting the 10-CBSA-4.0X5.5X0.13 shield to a PCB or other component, the shield must be soldered to the PCB or other component. The shield can be soldered using either a hot iron or a low-temperature soldering gun, depending on the type of component being shielded. The shield should be mounted on the side of the component away from the likely source of interference.The 10-CBSA-4.0X5.5X0.13 shield is designed to provide a high level of protection against RF interference, and it is tested to verify its effectiveness. The shield is tested against the EN 55022 standard, which is widely accepted as a reliable method of testing RF interference and shielding performance. The EN 55022 standard requires the shield to have an attenuation of at least 30dB. A shield with a higher attenuation rating will provide better protection against RF interference.The 10-CBSA-4.0X5.5X0.13 shield is designed to be used in a wide range of applications, and it provides a high level of protection from RF interference. This makes it an ideal choice for protecting sensitive electrical components from the effects of RF interference. The shield is easy to install, and it provides an effective method of protecting components from the harmful effects of RF interference.

The specific data is subject to PDF, and the above content is for reference