10013-20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional Coupler

A directional coupler is a device used to couple a portion of radio-frequency (RF) energy from a transmission line to another circuit. It is used to sample the current in a transmission line, or to couple a source of RF power to a matching load. In telecommunications applications, the directional coupler is used to reduce the power to a level that can be measured without perturbing the main radio path.

The 10013-20 directional coupler is a 3-port device that operates in the frequency range of 100 KHz to 20 GHz. It is constructed with a ferrite core and a network of components that match the impedance of the RF ports to that of the connections on the isolator. It is designed for operation in a variety of microwave systems, including cellular networks, wireless local area networks (WLANs), microwave antennas, and satellite communication systems.

The 10013-20 directional coupler works by using a network of passive components to split the signal. The signal is split in two directions, one to the input port and one to the output port. The RF port is connected to the input port. The power delivered to the output port is equal to the total power transmitted from the input port, minus the amount that is coupled to the RF port. The amount of energy coupled is determined by the network of components. The amount of power coupled to the RF port is a function of the difference between the source impedance and the load impedance.

In operation, the 10013-20 directional coupler senses the amount of power delivered to the port of the receiving device and transmits it into the output port. Since the power delivered to the output port is not necessarily the same as the power delivered to the input port, the directional coupler plays an important role in making sure that power levels are correct in the system. This ensures that no system components are over-driven or under-driven. The coupler can also be used to monitor the power level of the transmission line.

The 10013-20 directional coupler is used in a variety of applications that require the measurement or monitoring of RF power levels. It is also used in systems where a certain amount of power must be maintained on the transmission line, such as in a microwave communications system. The 10013-20 can also be used to monitor the power levels of different antennas in a multi-antenna system. This allows network designers to optimize power levels for various communications environments.

The 10013-20 directional coupler is a versatile device that can be used in a variety of scenarios. It is easy to install and operate and can provide accurate power measurement or monitoring capabilities for wireless systems. It is also a cost-effective way to measure and monitor RF power levels in a wide range of applications. With the proper design and use, the 10013-20 can help ensure that the correct power levels are maintained in any RF system.

The specific data is subject to PDF, and the above content is for reference