1008R-102J

DC Resistance (DCR):	320 mOhm Max
Height - Seated (Max):	0.095" (2.41mm)
Size / Dimension:	0.105" L x 0.095" W (2.66mm x 2.41mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	7.9MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	125MHz
Q @ Freq:	30 @ 7.9MHz
Series:	1008R
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	685mA
Tolerance:	±5%
Inductance:	1µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Fixed inductors are a type of passive electronic component that stores energy in the form of magnetic fields. This type of component is used in many different applications, from radio frequency interference suppression to DC/DC power converters. One of the most widely used fixed inductors is the 1008R-102J. This component is commonly used in inductor-based filter circuits and can provide reliable power for a large variety of applications.The 1008R-102J fixed inductor is a high Q, very low loss, shielded ferrite-core device. It is a through-hole mountable device, meaning it can easily be soldered onto a circuit board or securely fastened with screws. The component comes in a 1008 package, or 10x8mm. This size allows the inductor to be mounted in a wide variety of locations.The purpose of the 1008R-102J fixed inductor is to provide a steady flow of energy within a circuit. It stores energy in its magnetic field, which it generates when electricity flows through its windings. This magnetic field then acts as a reservoir, allowing the inductor to store some of the energy and release it at a steady rate over time. This is especially useful when dealing with high frequencies or interference, which often cause power spikes. By releasing the stored energy slowly, these spikes can be prevented.The working principle of the 1008R-102J is based on Faraday\'s law of induction. This law states that an induced electric current is proportionate to the rate of change of the magnetic flux flowing through a circuit. Therefore, when the current in the inductor changes, the magnetic flux linked to it also changes. This induces a voltage within the inductor, which can be exploited to store the energy and release it slowly over time.The 1008R-102J fixed inductor has many applications. It is often used in DC/DC power converters, as the inductor can be used to store the energy from the conversion process and release it at a steady rate. It is also used in radio frequency interference suppression, as it can prevent power spikes. Additionally, the inductor is used in inductor-based filter circuits, where it can filter out unwanted signals and ensure a steady flow of energy.In conclusion, the 1008R-102J fixed inductor is a versatile component that can provide reliable power for a wide variety of applications. Its working principle is based on Faraday\'s law of induction, allowing it to store energy in a magnetic field and then release it at a steady rate over time. This makes the 1008R-102J a highly effective and reliable component, and it is often used in DC/DC power converters, radio frequency interference suppression, and inductor-based filter circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description