101990073

Series:	--
Packaging:	--
Part Status:	Active
Sensing Distance:	0" ~ 11.811" (0mm ~ 300mm)
Sensing Method:	--
Sensing Object:	--
Output Configuration:	--
Sensing Light:	Infrared
Mounting Type:	--
Current - Supply:	5mA
Voltage - Supply:	5V
Package / Case:	Module, Pre-Wired

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical Sensors - Reflective - Logic Output Optical sensors are devices used to detect and measure light. In the field of logic output reflective optical sensors, the devices are typically used to detect the passage of objects or people. The output results in a digital high/low, on/off, presence or absence signal that can then be used with logic functions such as AND, OR, and XOR gates.The most basic type of optical sensor used for logic output is a reflective type. A narrow infrared or visible light beam is transmitted from the sensor source, and the reflected light is detected by a receiver in the source. When the beam is interrupted, the brightly reflected light will cause a change in the output signal. This output can be used for logic decisions, including indicating a change in state or the presence/absence of an applied signal.When selecting an optical sensor for logic output, some considerations must be taken. The wavelength and spectral sensitivity of the sensor should be compatible with the application. The beam width of the transmitted light must be selected to ensure an adequate signal-to-noise ratio for the proper detection of the reflected object.There are two types of sensor designs that can be used for logic output sensing. The first is continuous-wave (CW) sensing, where a continuous beam of the transmitted light is used to detect the presence of an object. The second type is pulse-width modulated (PWM) sensing, which uses pulses of light to look for a “target signal”, such as the presence or absence of an object or an on/off state.The 101990073 Optical Sensor is an example of a reflective type of logic output sensor. This sensor is designed to detect the passage of objects within 40 cm to 1 m. The output sensors are equipped with an infrared emitter, light source, and a detector. When the target is within a safe range, the emitter will produce light pulses that are detected by the detector and then converted into a digital signal.The sensor is fully configurable to adapt to the user’s application. It can be adjusted in order to adapt the sensitivity, the logic level, and the counter speed. It is also highly reliable and the total supply current is quite low, making it suitable for applications where efficient power management is key.In conclusion, logic output reflective optical sensors are widely used in the field of automation and robotics to detect the presence or absence of objects or people. The 101990073 Optical Sensor is a reliable and cost-effective logic output reflective optical sensor that offers users high performance in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description