1025-26K Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, such as the 1025-26K application field, are passive electric components with at least two electrical terminals. They typically consist of a coil of wire wound around a core of ferrite or other magnetically permeable material. The inductors store energy in the form of a magnetic field when an electric current is applied to them. Since inductance is a function of the number of turns of wire and the area enclosed by the coil, changes in these parameters can be used to obtain different values of inductance.

Operationally, the 1025-26K have a wide range of applications as their core and winding designs can be altered to provide specific characteristics. Generally, in power conversion applications, the inductor is used to reduce current peaks, reduce input noise, regulate output current or voltage, and provide a DC bias voltage. Commonly, inductors are also used in combination with circuitry such as an inductor-capacitor (LC) oscillator circuit to create harmonic oscillations. Moreover, inductors are often used in RF (Radio Frequency) applications to create filters and impedance matching.

In terms of the working principle, the 1025-26K inductor will limit the peak current of a power supply by acting as a contact between current-carrying loops. It stores energy in the form of a magnetic field generated due to the alternating current traveling through it. When the current is stopped, the magnetic field collapses and the energy stored is released back to the circuit.

In the linear operating region, the 1025-26K inductor acts like a resistor and will limit the current flowing through it when the voltage is constant. However, the inductor exhibits an opposition to changes in current, which is known as its inductance. This means that the inductance will vary with the frequency of the alternating current. The opposite is true for a capacitor as it exhibits an opposition to changes in voltage.

In addition, the 1025-26K inductor will also reduce the amount of input noise as it is used to create a low pass filter in circuits. The inductor will allow signals at low frequencies to pass through, while those at higher frequencies are blocked. This reduces the chance of interference from other electronic devices in the environment.

To sum up, 1025-26K inductors are a type of passive electric component with multiple uses, especially where power conversion and RF applications are concerned. They can be used to reduce current peaks, reduce input noise, regulate output current or voltage, and create an LC oscillator. In principle, the inductor stores energy in its magnetic field formed by the current, allowing it to act oppositely to changes in voltage or current, depending on the application. It also acts as a noise filter, allowing frequencies below a certain level to pass while blocking those at higher frequencies.

The specific data is subject to PDF, and the above content is for reference