10266-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 10266-3 Directional Coupler is one of the most important components in radio frequency (RF) systems used in both commercial and military applications. This device allows the signal strength of one transmission frequency to be measured and monitored while other signals are going through the system. The Directional Coupler can be used with transmitters, receivers, or any other type of equipment in the RF or microwave frequency range.

Typical applications of the 10266-3 Directional Coupler include monitoring signal strength for receiver and transmitter systems, measuring RF power and monitoring signal linearity in transmitter systems, providing a sample from any point in a system for use in a Vector Network Analyzer, and providing a reference point for RF measurements.

The basic functioning of the 10266-3 Directional Coupler is described below. A directional coupler is a four-port device, meaning that it contains four ports for connection in an RF system. The four ports are marked as Input, Output, Through, and Sampled. A transmission line is connected between the Input and Output ports, and also between the Through and Sampled ports. The transmission line is typically a coiled coaxial cable with an impedance matched to the system in which it will be used.

The transmission line is routed through what is commonly referred to as a "coupler" or "coupling loop". This loop is made of two sections of the same transmission line. As a signal is transmitted through the transmission line, a small portion of the signal is induced in the coupling loop, which is then routed to the Sampled port. This sampled portion is a measure of the signal\'s power at any given point in the system. This small induced portion is referred to as the coupling factor.

The Directional Coupler is designed to direct the sampled portion of the signal in the Sampled port away from the system in which the coupler is installed. This minimizes the Signal-to-Noise (S/N) ratio of the system. The directional coupler can also be used to measure the insertion loss of a system, as it measures the amount of power that is lost between the input and output of a receiver or transmitter. The amount of power lost can be used to determine the efficiency of a system.

The 10266-3 Directional Coupler is one of the most versatile and valuable components in RF systems. It is capable of measuring signal strength, insertion loss, and S/N ratio of a system. With its simple but effective design, the 10266-3 Directional Coupler can be used to great advantage in both commercial and military RF systems. It is an invaluable tool for monitoring the performance of a system and ensuring that it is functioning properly.

The specific data is subject to PDF, and the above content is for reference