10270-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF directional couplers are passive devices often used for signal monitoring in telecommunications, base station, and other RF applications. They measure the relative power of two signals traveling in opposite directions along the same transmission line. By connecting two identical reference receivers, or one reference receiver and a single antenna, to a pair of ports on a directional coupler, it is possible to measure the frequency, power, and direction of the signals on both sides of the directional coupler.

The 10270-3 directional coupler is a type of RF directional coupler. It is an especially compact, self-contained, directional coupler that was specifically designed to meet the height requirement of many military applications. The 10270-3 is mainly used for Logarithmic Power Ratio (LPR) measurements. The 10270-3 has a higher frequency of operation than other coupler designs, and therefore can be used for applications up to 300 MHz.

The 10270-3 directional coupler consists of two circulators, a single-ended, broadband directional coupler, and a pair of hybrid diodes. The circulators are placed in series so that the two signals can be separated into two branches. The broadband coupler provides a direct measurement of the power of both signals, while the two hybrid diodes measure the relative power between the two signals. The measured signal is then converted to a voltage signal by the amplifier.

The 10270-3 directional coupler is a type of RF directional coupler that provides an accurate measure of the relative power between two signals traveling in opposite directions along the same transmission line. The device uses two circulators and a hybrid diode to separate the two signals and measure the relative power between them. The measured signal is then converted to a voltage signal by the amplifier, and can then be measured with an electronic meter. The 10270-3 directional coupler is a compact, self-contained unit that is ideal for applications with height requirements. The higher frequency of operation allows it to be used for signals up to 300 MHz.

The specific data is subject to PDF, and the above content is for reference