103-180JS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are devices used to store energy, which, when coupled with a circuit, will create inductance in that circuit due to the magnetic field that gets created by the inductor. For an inductor, the application field includes: AC or DC circuits for power filtering, impedance matching, circuits with oscillations, transformers, and circuits with resonance.

Inductors are usually constructed of a conductive wire or material coiled around a core, which is usually made of some sort of magnetic material. The inductance of an inductor is determined by the following factors: core material, number of turns, type of winding, and external magnetic field.

Inductors can be divided into two categories in terms of applications: low frequency applications and high frequency applications. For low frequency applications, such as power line filtering, the inductor works by providing a low resistance to AC signals and a high resistance to DC signals. This way, it filters out higher-frequency AC interference from the power line, allowing only lower-frequency AC signals through in the circuit. For high frequency applications, the inductor\'s purpose is to provide an average impedance in the circuit to match the source impedance. Furthermore, the inductor can be used as part of an oscillator circuit, where it will provide a constant frequency by completing a few turns of a circuit. It also can be used in a transformer to decrease voltage, which is done by increasing the number of turns in the coil. Resonant circuits, which are circuits that interact with a certain frequency, can also integrate the inductor.

The 103-180JS is an inductor specifically designed to provide power filtering in DC circuits. It is a steel wire wound inductor with a peak current of 4.1A. Inside the inductor, 1.2mm enameled copper wire is wound around a ferrite core. It has a very wide operating temperature of -25°C to 85°C. This allows it to be used in a variety of environments, including industrial and automotive ones. It also has a maximum rated voltage of 150V, which is suitable for most modern appliances.

103-180JS is also known for its low equivalent series resistance (ESR). The low ESR produces low noise and little interference in the form of spikes and other signals. Additionally, its high inductance value allows for effective power filtering as the inductor resists changes in voltage and current, thus preventing them from going too far above or below the desired values.

The working principle of the 103-180JS inductor is simple. When current passes through the inductor, a magnetic field is induced around it. This magnetic field causes the inductor to resist any changes in current, and as a result, also affects the voltage across it. According to Faraday\'s law of induction, the voltage induced across the inductor is proportional to the rate of change of the current passing through it. This is how an inductor provides AC power filtering, as it reduces or completely eliminates higher frequency AC signals.

In conclusion, the 103-180JS is an inductor with a range of uses in power line filtering, impedance matching, oscillator circuits, transformers, and resonant circuits. It is constructed with 1.2mm enameled copper wire wound around a core, and has a maximum voltage of 150V. It is known for its low equivalent series resistance which creates a low-noise environment. Finally, its magnetic field caused by the current passing through the inductor produces a voltage according to Faraday\'s law of induction to provide power filtering.

The specific data is subject to PDF, and the above content is for reference