106-332F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 106-332F inductor is classified under fixed inductors and is characterized by a radial format with two embedded leads that are twisted together. It is a non-polarized device which means that it has no bias voltage and can be used in both directions.

The 106-332F is designed to provide high inductance stability and frequency response over a wide operating temperature range. The internal construction of the 106-332F is composed of a two-layer insulated wire core wound into an air-filled cylindrical core. This provides good electrical properties and low resistance input for high frequency applications.

The 106-332F is most commonly used in electronic circuits such as filters, amplifiers, transceivers, oscillators, regulators, and timers. It can also be used to increase the efficiency of switching converters, improve the attenuation frequency response, provide noise suppression, and allow for circuit miniaturization. By providing a filter, inductors are able to prevent high or unwanted frequencies and even suppress noise. In portable and mobile applications, the low electric resistance ensures that the component dissipates less heat, conserving power.

The 106-332F is an excellent choice in applications that require small size, low cost, and wide temperature range. This series of inductors has a typical inductance value range of 1.5 to 1.6 μH. The winding material is UL1446 components and the operating temperature range is -55°C to +125°C. The rated current and DC resistance range from 1.35A to 2.2A and 0.2Ω to 0.8Ω, respectively.

The working principle of 106-332F is quite simple. It is based on Faraday’s Law of Induction, which states that a time-varying magnetic field induces an electric current in a conductor. This current can be used for a variety of purposes, but in the case of the 106-332F, it is used to increase the inductance of an electric circuit. When current flows through the component, it creates a magnetic field around the winding that increases its inductance.

In summary, the 106-332F is a fixed inductor that is widely used in electronic circuits such as filters, amplifiers, transceivers, oscillators, regulators, and timers. It is characterized by a radial format with two embedded leads and is composed of a two-layer insulated wire core wound into an air-filled cylindrical core. The working principle of the 106-332F is based on Faraday’s Law of Induction. It is a non-polarized device with a wide temperature and current range, enabling it to be used in a variety of portable, mobile, and industrial applications.

The specific data is subject to PDF, and the above content is for reference