106-471F

DC Resistance (DCR):	500 mOhm Max
Height - Seated (Max):	0.075" (1.90mm)
Size / Dimension:	0.155" L x 0.110" W (3.94mm x 2.79mm)
Supplier Device Package:	--
Package / Case:	Nonstandard, 2 Lead
Mounting Type:	Surface Mount
Inductance Frequency - Test:	25MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	180MHz
Q @ Freq:	45 @ 25MHz
Series:	106
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	450mA
Tolerance:	±1%
Inductance:	470nH
Material - Core:	Iron
Type:	--
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Inductors, also known as coils, are electrical components found in coils and wires that serve many fundamental electrical and electronic functions. As such, inductors are vital components in electronic circuits that require energy-efficient and cost-effective methods of storing and transferring electrical energy. Traditionally, inductors are constructed from coils of wire around a core material such as iron. These traditional inductors form the basis for fixed inductors which have existed since the early days of electronics. One of the many types of fixed inductors available today is the 106-471F, widely used in a variety of applications. In this article, the application field and working principle of the 106-471F will be discussed in detail.

Construction of 106-471F

The 106-471F is a fixed inductor that is constructed from a ferrite core and an aluminum wire wound around it. The 106-471F has two main parts: the ferrite core and the aluminum wire winding. The ferrite core provides the inductor with the necessary inductance, while the aluminum winding serves to reduce the disturbances caused in the circuitry due to the inductor’s electromagnetic field.

Application Field of the 106-471F

The 106-471F is best suited for uses in situations where an inductor is needed with a limited physical size, relatively high inductance, and low losses. Thus, the 106-471F can be used in a wide variety of applications, including telecom, automotive, computer, and high-frequency circuits.The 106-471F is also extensively used in high-frequency radio systems, where its ability to reject radio-frequency interference is very useful. Furthermore, since the 106-471F consists of a ferrite core and a relatively small wire winding, it exhibits high efficiency and power density.

Working Principle of the 106-471F

The working principle of the 106-471F is based on the principle of inductance. In essence, inductance is the capacity to store energy in the form of a magnetic field. When a changing voltage is applied across the 106-471F, a corresponding current flow is generated, which is proportional to the rate of change of voltage. This current flow is responsible for creating the magnetic field that stores the energy in the inductor. This stored energy can then be utilized as electrical energy in the circuit.

Conclusion

The 106-471F is a fixed inductor widely used for applications requiring a limited physical size, relatively high inductance, and low losses. The 106-471F consists of a ferrite core and an aluminum wire winding, and its working principle is based on the principle of inductance. Due to its high efficiency and power density, the 106-471F is suitable for applications such as telecom, automotive, computer, and high-frequency circuits.

The specific data is subject to PDF, and the above content is for reference