1060343000

Fiber Optic Connectors

1060343000 Application Field and Working Principle

Fiber optic connectors refer to the interface between two optical fibers or the interface between optical fiber and active device. It has the advantages of small volume, good transmission performance, low insertion loss, good interchangeability, and anti-environmental ability. It is widely used in the communication industry.

The working principle of 1060343000 fiber optic connector is quite simple. It relies on the principle of total reflection inside the optical fiber for the transmission of light signals. The fiber connector consists of three parts — core, cladding and sheath. The core is made of glass with a certain refractive index to conduct light. The cladding is a layer of glass wrapped around the core. It has a lower refractive index than the core, so it reflects the light back into the core. The sheath is the third layer of the fiber connector. It is an extremely thin stripping material that prevents optical losses due to environmental and external effects.

The 1060343000 fiber optic connector is mainly used in the links of fiber communication, which usually includes the following three forms: PC (physical contact), UPC (ultra physical contact) and APC (angled physical contact).

PC is the most common and widely used form of 1060343000 fiber connector. In this process, two optical fiber ends are clamped together with a special device. Then, the fiber core is carefully polished to align the front end, while the cladding and sheath are in contact. Although such contact does not guarantee a strong connection, it is preferred in most cases due to its convenience.

UPC (ultra physical contact) is an enhanced version of PC. It is slightly different from ordinary PC in surface polishing technology, which can achieve a better connection effect. The polished tandem is smooth and the contact force is increased. UPC\'s connection efficiency is higher than that of PC, and the loss of light signal is lower.

The 1060343000 fiber optical connector also has the form of APC, which is an optical union connecting device with an angled connection surface. It uses special ceramics as the cladding to achieve angled polishing technology, so as to enhance the reflection efficiency between core and cladding layers. The reflectivity of APC reaches more than 60%, and it has better application in high-end communication systems.

In summary, the 1060343000 fiber connector is a kind of optical fiber connector which is widely used in the communication industry. It has three forms of PC, UPC and APC, which are applied in different environment and communication system according to its working principle and application field. Each kind of fiber connector will affect the entire communication system, so it is very important to choose the corresponding connector for use.