1092QA3-12V

Panel Indicators, Pilot Lights

A 1092QA3-12V (hereafter referred to as 1092 QA3) is a 12 Volt DC powered solid state panel indicator light. It is used to identify the status of switches, relays, circuit breakers, etc.

The 1092 QA3 uses two light sources in its design: one at the center of the lens assembly and the other at the edge of the base, which is slightly visible through the translucent glass bulb. The center light source helps to provide illumination to identify the status of the switch. The edge light source helps to identify the direction of the switch movement, and is also used in some cases to identify the switch position.

The 1092 QA3 features a rugged construction with an impact-proof lens assembly and water-resistant seal to ensure a long, trouble-free service life. This indicator meets the requirements of the UL 94V and EN 861 standards.

The 1092 QA3 panel indicator operates on 12 volts DC and uses a current draw of 0.23 amps at full illumination. The output is a power rating of 2.76 watts. The LED power source used in this indicator is a red light emitting diode (LED).

The operation of the 1092 QA3 does not cause ultraviolet (UV) radiation or interference to other devices. The indicator will not cause fatigue of the eyes due to its low intensity light output.

The 1092 QA3 has a working principle of converting the power energy from the 12 Volts DC power supply to the light energy produced by the LED. The LED communicates this energy to the base of the indicator. The bulb absorbs this energy and produces a visible light which illuminates the panel indicator.

The brightness of the indicator can be adjusted by the user by controlling the input voltage and current. This allows the user to choose the desired brightness based on the application. The indicator can be used in a variety of applications such as indications for machines, on control boards, on alarm panels, and in process control.

The 1092 QA3 panel indicator is a reliable, durable and cost-effective solution for a wide range of applications in the automation industry. It is available in different sizes and LED colors to fit any lighting application and switch control.