110-44-952-61-001000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Sockets for ICs, Transistors

A socket for ICs, transistors or other electronic components is a device used for providing reliable electrical contact between an electrical device and its associated circuits. It is typically made of a metal frame with holes for electrical components, and a die-cast metal sleeve, often made of copper or brass, to hold the electrical contacts. The metal frame has an interior surface that is conductive, and the sleeve holds the contacts in a fixed position. The contacts are usually held in place by pin connections or a combination of clip-on or press-fit connections.

There are many types of sockets for ICs, transistors and other electronic components, including through-hole, surface mount, surface mount with double sided, and miniaturized surface mount. Through-hole socket designs are typically used to mount standard integrated circuits or transistors that are meant to be soldered to the board. The metal frame with holes and the die-cast metal sleeve make up the body of the socket, while the pin connections and clip-on or press-fit connections hold the contacts in place. Through-hole sockets are commonly used for devices that require mechanical strength, such as transistors and integrated circuits.

Surface mount sockets are designed to securely mount devices on the surface of a board. They are relatively more compact than through-hole sockets, and have corresponding contacts that rest directly on the mounting surface of the board and slightly below the surface. Surface mount sockets are designed for high frequency operations, and are ideal for providing electrical connections between components at a low cost. They are also used to reduce board size, as they are smaller compared to through-hole sockets.

Surface mount with double-sided sockets are designed to securely mount double-sided boards onto a mounting surface. These sockets have four pins, two each for the top and bottom sides of the board. The pins are typically soldered to the board, and they provide electrical connection between the top and bottom surfaces of the board. Miniaturized surface mount sockets are similar to standard surface mount sockets, but are much smaller. They are used to mount miniaturized components such as in cellular phones, memory cards, or GPS devices.

A 110-44-952-61-001000 socket is a type of socket designed for through-hole applications. This type of socket has four pins which are typically soldered to the board. It is designed for high-frequency and high-voltage applications, and is used to connect integrated circuits such as amplifiers, voltage regulators, and other circuits. The 110-44-952-61-001000 socket has a die-cast metal sleeve which securely holds the contacts in place, providing a reliable electrical connection between the circuit and the device.

The working principle of a socket for ICs, transistors, or other electronic components is relatively simple. The socket consists of the metal frame, which has an interior surface that is conductive, and the die-cast metal sleeve which holds the contacts in place. When the device is inserted into the socket, the contacts on the device are brought into contact with the Interior surface of the frame, establishing an electrical connection between the device and the circuit board. This connection allows current to flow through the circuit, and enables the device to work properly.

In conclusion, sockets for ICs, transistors, and other electronic components are vital components used to ensure an electrical connection between a circuit and its associated device. The 110-44-952-61-001000 type socket is designed for through-hole applications, and is used to connect minutes components such as amplifiers, voltage regulators, and other applications. The working principle of sockets is relatively simple, and involves establishing an electrical connection between the device and the circuit by bringing the contacts on the device into contact with the interior surface of the metal frame.

The specific data is subject to PDF, and the above content is for reference