1110-470K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electronic components that act as passive elements in a circuit and are used to control the flow of electricity. The 1110-470K fixed inductor is a type of fixed inductor used in many types of electronics, including cell phones, radios, computers, and home entertainment systems. It consists of a coil of wire wound with a magnetic core and is used to temporarily store energy. The 1110-470K fixed inductor is commonly used in power supplies, filters, switching power supplies and wireless communications systems.

The 1110-470K fixed inductor has a winding diameter of 1110mm, a height of 470mm, and a maximum inductance of 3.9nH. The inductance of this fixed inductor depends on the number of turns in the winding, the material of the core and the size of the core. The 1110-470K fixed inductor has an impedance of 8 ohms and can handle a peak current of 6A. It is commonly used in circuits that require high voltage, such as switched mode power supplies.

The working principle of the 1110-470K fixed inductor is the same as that of any other fixed inductor. When current flows through it, a magnetic field is created which produces a voltage across the inductor. This voltage is proportional to the rate at which the current changes in the winding, and this is known as inductance or self-inductance. The self-inductance is a measure of how easily a current can be induced in the inductor.

When an alternating current is applied to the inductor, it will produce an alternating magnetic field, which will create an alternating voltage across the inductor. The alternating voltage will cause current to flow in the opposite direction to the flowing current in the wound wire. This current is said to be in opposition to the original flowing current and it is referred to as “counter-emf”.

The counter-emf opposes the original current in the inductor and causes a decrease in the rate of change of the current, thereby decreasing the amount of energy stored in the inductor. The amount of energy stored in the inductor is known as “inductance” or “self-inductance”. The self-inductance is a measure of how easily a current can be induced in the inductor.

The 1110-470K fixed inductor is a useful device for many different applications. It can be used to filter signals in a power supply, in a switching power supply, and in wireless communications systems. The 1110-470K fixed inductor is also used in audio and video circuits to reduce noise and distortion. Additionally, it can be used as a voltage stabilizer or a choke to reduce the current flowing in an electrical circuit.

In conclusion, the 1110-470K fixed inductor is a versatile electronic component that can be used in many different types of circuits. It consists of a coil of wire wound with a magnetic core and has a maximum inductance of 3.9nH. Its self-inductance is a measure of how easily a current can be induced in the inductor. The 1110-470K fixed inductor is commonly used in power supplies, filters, switching power supplies and wireless communications systems.

The specific data is subject to PDF, and the above content is for reference