11306-3S RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

In the world of radio frequency (RF) transmission technology, one of the most important components in the system is the RF directional coupler – a device that is used to couple some of the power in a transmission line for measurement purposes while leaving the rest to be delivered to its intended destination. One of the most commonly used RF directional couplers is the Model 11306-3S, which is designed with a high directivity specification of ≤–40 dB (at 10 MHz) and a high frequency stability that allows it to handle up to an 18 GHz bandwidth. The 11306-3S is a 50 ohm coupler with three ports, allowing two-way signal transmission between two antennas while coupling a portion of the signal to a third or “measurement” port for additional testing or monitoring. In this article, we will discuss the application field and working principle of the 11306-3S RF directional coupler.

The 11306-3S coupler is widely used in many industries and applications, including military, medical, broadcast, industrial, telecommunications, radar, and automotive. It is also used by radio enthusiast and hobbyists for antenna and circuit testing. In military applications, these couplers are used for measuring and monitoring the power of high-power, high-frequency transmitters. In medical applications, they are used for measuring electrical pulses in ultrasound diagnosis. In broadcast applications, the 11306-3S is commonly used for measuring the power transfer between two antennas for accurate signal transmission. In industrial applications, these couplers are used for correlating the measurement of parameters such as load current, electric field strength, or phase angles in industrial circuit testing. The 11306-3S is particularly beneficial in telecommunications applications, as it can be used to measure the transmitted power of cellular base stations and other communication systems.

The 11306-3S RF directional coupler is built on a symmetrical design principle. It consists of a waveguide loop that runs through three ports with a tap line between each port connecting them. The ports are labeled 1, 2, and 3, with port 1 being the signal input port, and ports 2 and 3 being its corresponding output port and measure port, respectively. The waveguide loop is designed to act as an impedance transformer, in which the primary impedance is matched to the signal source impedance while the secondary impedance is matched to the load impedance. This allows the coupler to deliver signal power efficiently from the source to the load while also allowing some of the signal power to be diverted to the measure port. The 11306-3S also uses a dielectric, typically a block of ceramic that forms an isolator, to reduce any cross-talk or stray signals from the waveguide loop that could reduce precision or accuracy in measurements.

The 11306-3S’s high directivity and frequency stability also play an important role in improving the measurement accuracy and precision of the couples. Its high directivity ensures that the power delivered to the measure port is accurately reflected back to the source, allowing for accurate wattmeter measurements. Its high frequency stability ensures that the frequency response is maintained across its entire operating frequency range, allowing for more accurate measurements at higher frequencies. This reduces the effects of intermodulation products and ensures that these couplers can be used in high-power RF environments without introducing noise or distortion in the measure signal.

In addition to its high performance features, the 11306-3S is also very reliable and lightweight. It is made from a robust aluminum housing, which ensures that it can withstand extreme temperatures and other harsh environmental conditions. The aluminum housing also makes it lightweight, making it suitable for mobile applications and/or installations in confined spaces. Furthermore, its small size makes it a great space-saving option for any application.

Through its symmetrical waveguide design, high directivity, frequency stability, and robust aluminum housing, the 11306-3S RF directional coupler is able to provide accurate and reliable measurements in a wide range of applications. It is a great choice for anyone looking for an efficient and dependable coupler to measure power transfer levels in commercial, industrial, automotive, medical, and other application environments.

The specific data is subject to PDF, and the above content is for reference