1140-E211-P1M1-10A

Series:	1140
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Thermal
Moisture Sensitivity Level (MSL):	--
Current Rating:	10A
Voltage Rating - AC:	240V
Voltage Rating - DC:	48V
Number of Poles:	1
Actuator Type:	Push to Reset
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers

The 1140-E211-P1M1-10A circuit breaker is a device that monitors the amount of electricity flowing in a circuit and automatically switches the circuit off when the predetermined threshold value is exceeded. This helps to prevent damage to the electrical equipment from excessive current. This type of circuit breaker is often used in industrial and commercial applications, as well as in more standard residential settings.

Working Principle

The 1140-E211-P1M1-10A circuit breaker works by monitoring the amount of current flowing through the circuit. It will detect when the current exceeds the pre-determined threshold and will then switch the circuit off. The current is monitored using a sensor in the circuit, which then sends a signal to the circuit breaker when the preset value is exceeded. The circuit breaker then interrupts the flow of electric current and the circuit is shut off.The 1140-E211-P1M1-10A circuit breaker is designed to protect sensitive electronic equipment from damage due to excessive current or short circuits. This type of circuit breaker is particularly useful in industrial applications such as powering large loads or motors with high startup currents. It is also used to protect residential circuits from short circuits and overloading.

Application Field

The 1140-E211-P1M1-10A circuit breaker is a type of circuit protection device that can be used in a variety of applications. It is often used in industrial and commercial applications due to its ability to protect against large current surges or short circuits. It can also be used in residential settings to protect against overloading or short circuit conditions.The 1140-E211-P1M1-10A circuit breaker is designed to provide protection in a wide range of applications including lighting control, motor control, power distribution, and control systems. It is also suitable for use in hazardous locations, as it is certified to provide protection from dust, dirt, and water spray.

Advantages and Disadvantages

The 1140-E211-P1M1-10A circuit breaker offers several advantages. It is an effective way to protect circuits from overcurrents and short-circuiting, which can damage electrical equipment. It is also relatively compact in size, making it easy to install and use, and it is available in a variety of sizes and ratings to suit different applications.One potential disadvantage of using the 1140-E211-P1M1-10A circuit breaker is that it can take a while to detect an overcurrent condition and switch off the circuit, potentially resulting in damage to the equipment before it is switched off. It is also important to ensure that the circuit breaker is matched to the circuit in terms of current, voltage, and wattage ratings to ensure it is able to provide adequate protection.In conclusion, the 1140-E211-P1M1-10A circuit breaker is a useful device for protecting circuits from overloads and short circuits. It is well suited for industrial and commercial applications where its high current protection capabilities are needed, and can also be used for general-purpose applications in residential settings. Its relatively compact size, wide range of sizes and ratings, and straightforward installation make it a popular choice for circuit protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description