1210-068J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors store energy in the form of a magnetic field and support AC/DC circuits. These components come in a variety of shapes, sizes and designs but typically consist of a coil of copper wire and an iron or ferrite core. The 1210-068J inductor is a 0.8 mm square, 0.7 mm high device and is small enough to fit printed circuit boards with limited space.

The 1210-068J has an inductance range of 0.18-1.0 µH, thus making it suitable for low frequency circuits. At a given frequency and load, the inductance value determines the impedance of the circuit and the total current flowing through the inductor. Therefore, for a given frequency, an inductor with a lower inductance value is desired for low impedance and higher current values, while a higher inductance value is favourable for higher impedance and lower current values.

The wide range of inductance values can be achieved by changing the dimensions of the inductor, as well as the core material and the number of turns in the coil. The 1210-068J is made of a ferrite core and its internal area is made of a ferrite material that has high permeability and low losses. This combination allows for the inductor to have a higher saturation current and lower self-heating.

The 1210-068J is suitable for AC/DC circuits since it has a low DCR. This inductor has an ideal operating temperature ranging from -40°C to +125°C, making it suitable for a wide variety of operating conditions. This inductor also has high insulation resistance and high reliability, making it an ideal choice for a variety of applications.

The 1210-068J is commonly used in switch mode power supply circuits, DC-DC converters, motor and transformer circuits. Furthermore, it can be used in RF circuits as well as in analog and digital circuits. The inductor works by storing energy in the form of a magnetic field when a current flows through its coil. The energy stored in the inductor’s magnetic field opposes the changes in the current. For example, when the current starts to increase, the inductor’s magnetic field increases and generates a voltage back reaction, which opposes the change in current. This reaction therefore acts to maintain the current at a constant level and reduce sudden current surges.

In conclusion, the 1210-068J is a reliable and easy to use fixed inductor suitable for a wide range of applications. Its low DCR and wide operating temperature range make it an ideal choice for a variety of AC/DC and RF circuits. Furthermore, its small size makes it perfect for circuit boards with limited space.

The specific data is subject to PDF, and the above content is for reference