1210-104F

DC Resistance (DCR):	13 Ohm Max
Height - Seated (Max):	0.101" (2.57mm)
Size / Dimension:	0.128" L x 0.095" W (3.26mm x 2.41mm)
Supplier Device Package:	1210
Package / Case:	1210 (3225 Metric)
Mounting Type:	Surface Mount
Inductance Frequency - Test:	2.5MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	8MHz
Q @ Freq:	30 @ 2.5MHz
Series:	1210
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	120mA
Tolerance:	±1%
Inductance:	100µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Fixed inductors are widely used in electronic circuits, especially in the field of frequency control. Today, this article will focus on the 1210-104F fixed inductor and its application field and working principle. The 1210-104F looks like a cylinder, with each end sealed so there is only one hole in the center. Inside are two coils and a metal core, one of the coils is connected to the metal core, the other is surrounded by a permanent ferrite magnet. When current flows through the coils, an electromagnetic field is created and a voltage is induced. This voltage is inversely proportional to the speed of the current’s changes in time. The 1210-104F can be used to provide a frequency-dependent component in all applications involving high or low-frequency circuits. It is used as a filter in radio receivers, to regulate the frequency of signals. It can also be used as a waveform shaping element. The inductance of the 1210-104F can also used to controll the current in a circuit, as well as to store and deliver energy. In order to obtain the frequency-dependent characteristics of the 1210-104F, a resistor must be connected in series. The resistor restricts voltage and current, and the inductor produces the frequency-dependent characteristics. This is used in high-frequency switching circuits to reduce the amplitude of high-frequency signals. Moreover, the 1210-104F has a wide range of applications in power supplies. It can be used as an inductor to filter out high-frequency components in rectified alternating current. It can be used to store and deliver energy, or to create an oscillating circuit, such as a transformer or chopper. In summary, the 1210-104F is a frequency-dependent component used in various electronic circuits. It is used as a filter, to shape waveforms and to reduce the amplitude of high-frequency signals. It also has applications in power supplies and switching circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description