1210-122F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are one of the oldest electronic components and are used to store energy in the form of a magnetic field. The 1210-122F is a type of fixed inductor that is used in many types of electronic applications, from power supplies to amplifiers, radio receivers, and synthesizers. This article will discuss the application field and working principle of the 1210-122F fixed inductor.

The 1210-122F is a fairly versatile fixed inductor and can be used in a wide variety of electronic devices. It is commonly used as a filter and also for power isolation in power supplies. It is also suitable for use as a signal transformer or amplifier, in radio receivers, and as a feedback element in synthesizers. It is also used as a hold-up capacitor in motor controllers, as it has a low coercivity and therefore is not affected by the high frequency supply voltage ripple.

In terms of its working principle, the 1210-122F is made of a pre-pressed coupling core, which is normally made from nickel or ferrite. When an alternating current is applied, it causes the core to vibrate, inducing a magnetic flux which stores energy in the form of a magnetic field. The difference between the current and voltage is a measure of the total flux that is stored, and this is called the inductance.

The inductance of the 1210-122F is measured using a test circuit, in which it is connected between two terminals of a power supply and a variable frequency generator. The amount of current that flows through the inductor is measured and converted to a voltage, which is then compared to the supply voltage to determine the inductance. The inductance of the 1210-122F is usually in the range of several microhenries, and it is typically used in applications where high-frequency signals need to be filtered.

The 1210-122F is also used to reduce noise and interference in electronic circuits. This is because it filters noise induced by the power supply or other external sources out of the signal. It also helps to reduce voltage spikes that can occur in the circuit, leading to shorter lifetimes of components and less reliable operation of the circuit. The 1210-122F is especially suitable for use in applications such as pagers and cell phones, where a low-noise signal is required for best performance.

In conclusion, the 1210-122F is a type of fixed inductor that can be used in a wide range of applications. It is made up of a pre-pressed coupling core, which is normally made from nickel or ferrite, and it can store energy in the form of a magnetic field. Its inductance is measured using a test circuit, and it is usually in the range of several microhenries. The 1210-122F is also used to reduce noise and voltage spikes in circuits and is especially suitable for use in portable electronic devices such as pagers and cell phones. As such, it has become an important component in many electronic devices and continues to be used extensively in the modern age.

The specific data is subject to PDF, and the above content is for reference