1214-30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transistors - Bipolar (BJT) - RF

The 1214-30 is a transistor that has been used since the early 1950s when the development of the p-n junction allowed for the miniaturization of transistors. Due to its small size and ability to be used in circuits operating at high frequencies, the 1214-30 has become widely used in the RF industry.

The 1214-30 is an epitaxial-base silicon transistor. It is a three-terminal, single-ended device and is commonly available in the TO-18, TO-39, TO-92 and larger packages. The 1214-30 can operate at frequencies up to 100MHz, which makes it suitable for both the VHF and UHF radio bands. Its gain varies to around 40dB at 40MHz, and its noise figure is typically around 10dB.

The typical circuit diagram of the 1214-30 is shown below. The device normally has three terminals, Base, Emitter and Collector. As the name implies, the Base Collector is the path through which current flows when a voltage is applied to the Base. The 1214-30 is designed so that when a reverse bias is applied between the Base and the Collector, the device switches off and does not allow current to flow.

The 1214-30 offers many advantages over other transistors such as the ability to operate at higher voltage and temperature, and its low noise figure. It is also useful for many applications where high-frequency operation is required. Some of these applications include radio receivers, oscillators, pulse amplifiers, data modulators, switches and communications.

The 1214-30 can be used in a variety of different circuits, but its most common application is in amplifiers. When used in an amplifier, it offers good linearity over a wide frequency range. It is also known to produce good frequency response characteristics without the need for additional Negative Feedback, making it an ideal choice for amplifier design.

In addition to amplifiers, the 1214-30 can also be used in switching applications. Its low input capacitance and high switching speed makes it suitable for high-frequency switching applications. It is also useful for data communication where its low-noise figure helps reduce interference in the communication link. The 1214-30 can also be used in oscillators and other applications requiring high-frequency operation.

The 1214-30 is a useful device for many applications, and its small size and high-frequency operation provide an advantage over larger transistors. Its wide availability, from a variety of manufacturers, further enhances its utility. The 1214-30 has become a popular choice for RF application designs and is widely used in the industry.

The specific data is subject to PDF, and the above content is for reference