127-0711-221

Dielectric Material:	Polytetrafluoroethylene (PTFE)
Operating Temperature:	-65°C ~ 165°C
Center Contact Material:	Beryllium Copper
Voltage Rating:	335V
Mating Cycles:	100
Insertion Loss:	--
Series:	--
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Connector Style:	SMP
Connector Type:	Plug, Male Pin
Contact Termination:	Solder
Shield Termination:	Solder
Impedance:	50 Ohm
Mounting Type:	Surface Mount
Mounting Feature:	--
Cable Group:	--
Fastening Type:	Snap-On
Frequency - Max:	26.5GHz
Number of Ports:	4
Features:	Full Detent
Housing Color:	Gold
Ingress Protection:	--
Includes:	--
Body Material:	Beryllium Copper
Body Finish:	Gold
Center Contact Plating:	Gold

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) - 127-0711-221 application field and working principleCoaxial connectors (RF) are devices used to connect RF signals between two points in an electronics system. They typically take the form of a small diameter cable, typically made of copper or a copper alloy, and terminate at each end with a coaxial connector. The most common type of RF connector used for these types of applications is the 127-0711-221. The 127-0711-221 is a coaxial connector with a reverse thread male termination. It is primarily used to connect to an antenna. The male connector has a threaded screw that locks into a plate or other structural component of an antenna, while the female connector has a threaded sleeve that locks over the male connector. The construction of the 127-0711-221 is relatively simple. The body of the connector is made from brass die-cast metal and is nickel plated. The connecting threads are stainless steel, and the contact surface is gold plated to ensure low electrical resistance and secure electrical connection. The crimp sleeves of the connector are made from copper and are plated with silver and gold for low electrical resistance and secure electrical connection. The primary functions of the 127-0711-221 are to act as a conduit of an RF signal between two points, to provide an electrical connection between two points, and to ensure that no unwanted RF signal is transmitted. In order to ensure that the signal is conducted and transmitted with minimal loss, the connector must have low electrical resistance and provide secure electrical connection. The nickel plating of the body and the gold plating of the contact surfaces of the connector help to achieve this. The stainless steel of the threads helps to ensure that the connector does not corrode and that the connection between the two points remains secure. The silver and gold plating of the crimp sleeves also helps to ensure low electrical resistance and secure electrical connection. The 127-0711-221 is most often used for applications such as cellular telephones, wireless LANs, GPS receivers, and satellite radio systems. As these applications usually require an RF connection that is secure, reliable, and provides minimal signal loss, the 127-0711-221 is a suitable choice. In conclusion, the 127-0711-221 is a coaxial connector used to connect RF signals between two points in an electronics system. It is typically used in applications such as cellular telephones, wireless LANs, GPS receivers, and satellite radio systems due to its design allowing for secure electrical connection and minimal signal loss. The construction of the connector helps to ensure that it provides minimally-loss, secure electrical connection.

The specific data is subject to PDF, and the above content is for reference