131-3801-231

Series:	--
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Connector Style:	SMB
Connector Type:	Plug, Female Socket
Contact Termination:	Solder
Shield Termination:	Solder
Impedance:	50 Ohm
Mounting Type:	Through Hole
Mounting Feature:	--
Cable Group:	--
Fastening Type:	Snap-On
Frequency - Max:	4GHz
Number of Ports:	1
Features:	--
Housing Color:	Gold
Ingress Protection:	--
Includes:	--
Body Material:	Brass
Body Finish:	Gold
Center Contact Plating:	Gold
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Operating Temperature:	-65°C ~ 165°C
Center Contact Material:	Beryllium Copper
Voltage Rating:	335V
Mating Cycles:	500
Insertion Loss:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)

Introduction

Coaxial connectors (RF) are used to connect two coaxial cables, enabling electrical signal transmission. Coaxial connectors are commonly used in electronics applications, including cable television, radio frequency transmission, satellite television, and microwave signal transmission. The most common coaxial connectors are designed to match specific frequencies, such as the FL-31 type connectors, which are designed to match the 31000 frequency of television signals.

131-3801-231 Application Field and Working Principle

The 131-3801-231 coaxial connector is designed for use in radio frequency applications up to 11 GHz. This type of coaxial connector can be used for a variety of applications, including radiating cables, antennas, transmission lines, and RF test equipment.The coaxial connector is designed with a center conductor and an outer insulating shell. The center conductor is made of a silver-plated copper alloy and has a diameter of 0.085" (2.2 mm). The center conductor is surrounded by an insulating shell, which is typically made of PTFE (Teflon). This shell is designed to protect the center conductor from oxidation and to provide an air gap between the center conductor and the outer surface of the shell. The outer surface of the shell is typically made of either brass or aluminum and is designed to provide a tight fit when connected to a mating connector. A variety of accessories are available for installation of the 131-3801-231 connector, including strain relief collars, end caps, and couplings.The working principle of the 131-3801-231 coaxial connector is based on the flow of electrical energy from one point to another through a medium such as air. In the case of radio frequency signals, the signal is transmitted via an electromagnetic wave. As the wave passes through the center conductor of the coaxial connector, it is picked up by the inner conducting core, and the signal is transmitted along the conductor to the other end of the connector. At the same time, the outer insulating shell acts to minimize the effect of electromagnetic interference from other sources.

Conclusion

The 131-3801-231 coaxial connector is designed for use in high-frequency radio frequency applications. It is capable of transmitting signals up to 11 GHz with minimal interference from other sources. The connector consists of a center conductor and an outer insulating shell that are able to provide a strong electrical connection between two coaxial cables. A variety of accessories are available for use with the connector in order to ensure a tight and secure connection.

The specific data is subject to PDF, and the above content is for reference