131-6402-001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF): 131-6402-001 Application Field and Working Principle

131-6402-001 is a type of RF coaxial connector. These compact precision connectors are designed for use in broadband applications where high performance is required, such as satellite TV, cable TV, VHF/UHF radio transmission, and even high-speed digital signal communication. Also, these connectors are commonly used in antenna applications, test instrumentations, biomedical engineering, medical electronics, and aerospace engineering.

The 131-6402-001 circumferentially polarized radiuses interface designed with high-performance characteristics. These connectors provide excellent electrical parameters and application flexibility, the adopts of the H0 sub-series design is to make the intermodulation performance being improved to make more stable performance. The performance of these connectors help to create lower levels of noise and distortion.

The 131-6402-001 consists of two components, an inner tube (cable) and an outer ring (housing or plug). The inner tube typically consists of a non-conductive material such as polyethylene, polyurethane or Teflon and provides an electrical shield around the conductor. The radio frequency (RF) energy is conducted through a conductor that is connected to the center of the inner tube, and the outer tube provides a ground for the current to flow around the connector. The outer tube is typically constructed of a durable, conductive material such as zinc, aluminum, or brass and is surrounded by an insulation material to prevent RF leakage.

The outer tube also provides a support structure, which provides a mechanical pressure point on the cable. This is used to ensure that the mechanical connection between the inner and outer components of the coaxial connector is secure. The 131-6402-001 connector has a single hole in its center to provide a secure connection between the cable and the connector. The housing of the 131-6402-001 cable also has a plastic strain relief part, which helps to provide added protection to the cable.

The working principle of the 131-6402-001 works by using a chamber designed to create a space that minimizes the impedance mismatch between the connection and the cable. It works by using an evacuated chamber, which is filled with a low temperature dielectric such as PTFE. This dielectric is used to reduce the signal loss and minimize the impedance mismatch between the connector and the cable. The chamber also helps to reduce the reflection that can cause the signal distortion.

Finally, the 131-6402-001 contains pins, nuts, washers, and other hardware components that are designed to make the connection secure. To provide a good connection, the pins and nuts must be properly mated, and the washers are designed to secure the connection and prevent any loss of signal. The 131-6402-001 coaxial connector is a reliable and durable component that is ideal for any application where a highly reliable connection is required.

The specific data is subject to PDF, and the above content is for reference