131-9701-201

Frequency - Max:	4GHz
Insertion Loss:	--
Mating Cycles:	500
Voltage Rating:	335V
Center Contact Material:	Copper Alloy
Operating Temperature:	-65°C ~ 165°C
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Center Contact Plating:	Gold
Body Finish:	Gold
Body Material:	Copper Alloy
Includes:	--
Ingress Protection:	--
Housing Color:	Gold
Features:	Non-Magnetic
Number of Ports:	1
Series:	--
Fastening Type:	Snap-On
Cable Group:	--
Mounting Feature:	--
Mounting Type:	Through Hole
Impedance:	50 Ohm
Shield Termination:	Solder
Contact Termination:	Solder
Connector Type:	Jack, Male Pin
Connector Style:	SMB
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Coaxial Connectors (RF) are used to connect electrical components and create a continuous conductor path to provide an electrical signal. They are commonly used for communication, instrumentation, audio and video systems, and data networks. The most commonly used type of connector is the 131-9701-201 coaxial connector. In this article, we will discuss the application field and working principle of 131-9701-201 connectors.

Application Field

131-9701-201 connectors are often used in audio/video systems, such as in CCTV, broadcast television, and professional audio/video systems. It is also used in telecommunications networks, such as cellular networks and broadband infrastructures. Additionally, 131-9701-201 connectors are used in laboratory and industrial applications and in electronic measurement equipment. It is also used in WiFi routers, BaseStation, LAN Systems, and Bluetooth devices.

Working Principle

A 131-9701-201 coaxial connector consists of three main parts: the inner conductor, the outer conductor, and the surrounding insulation. The inner conductor is usually a single copper or silver wire; and the outer conductor is usually a metal tube or sleeve. The insulation is usually a dielectric based upon air, foam, plastic, or some combination of these materials. The inner conductor is connected to the signal source, while the outer conductor is connected to the signal destination or ground. The gap between the inner and outer conductors forms a gap in the signal path, which is interrupted by the insulator. This allows for greater control of the signal and more precise RF measurements.For a 131-9701-201 connector to function properly, the inner conductor must be securely connected to the source, while the outer conductor must be securely connected to the destination or ground. This ensures that the signal has a continuous path through the connector. Depending on the application, this connection can be made via crimping, soldering, or other methods. After the cables are connected, a crimp ferrule should be utilized to ensure a stable and secure connection. The crimp ferrule also helps to provide a water resistant seal on the connection. The 131-9701-201 coaxial connector is a popular choice due to its high performance and reliability. It is designed to provide a strong signal path with minimal interference. Furthermore, its sturdy construction makes it resistant to mechanical wear and deterioration. As such, it is a reliable choice for a variety of applications.

Conclusion

The 131-9701-201 coaxial connector is a reliable type of connector that is commonly used in audio/video systems, telecommunications networks, laboratory and industrial applications, and electronic measurement equipment. It consists of an inner conductor, an outer conductor, and an insulator, which helps to reduce interference and create a strong and continuous signal path. The connector is easy to install and is designed to provide a water and dust resistant connection. As such, it is a reliable choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference