133-3801-806 Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors (RF) are used in a wide variety of broadband communication applications for both digital and analog signal transmission. These connectors enable the efficient transmission and reception of high-frequency electrical signals and provide a secure connection for a wide variety of coaxial cables.
The type of connector used in any application will vary depending on the frequency range, the impedance of the cable, the environment of the installation, and many other factors. One of the most commonly used type of coaxial connector is the 133-3801-806 type. This type of connector is used in applications ranging from radar and navigation systems to consumer electronics and broadcast systems.
The 133-3801-806 connector is a 50 ohm type and is designed for use in a wide variety of applications. The connector has a threaded interface and features a crimp ring style. This type of connector is capable of handling frequencies from DC to 8 GHz and has an insertion loss of 0.2 dB max. This type of connector is also resistant to corrosion and is suitable for indoor and outdoor operation. The connector is typically used in applications such as communication systems, broadcast systems, control systems, and audio/video systems.
The 133-3801-806 connector is commonly used in conjunction with a terminator or load. A terminator is a device used to terminate an unused port on a transmission line such as a coaxial cable and to provide known impedance for the signal. Terminators can be either passive or active, with the former offering infinite impedance and the latter providing a low impedance termination. The termination used for this type of connector is typically a shorting type and is designed to provide a controlled impedance for the transmission line. The impedance of the termination will usually be the same as the impedance of the connector.
The working principle of a 133-3801-806 connector with a terminator is simple. A signal is transmitted through the connector and the terminator provides a lower impedance path for the signal to flow into, thus providing a known impedance for the signal. This ensures that the signal is not reflected back into the transmission line, which can cause distortion or signal loss. Additionally, the terminator also prevents spurious signals from entering the transmission line, which can result in interference or noise in the signal. The termination also helps to protect the connector from damage due to overvoltage or transient conditions.

The specific data is subject to PDF, and the above content is for reference