133-8434-001

"Coaxial Connectors (RF)," are an important part of any radio frequency (RF) system and are widely used for transmitting radio signals. The type of connector used for a particular application can have a major impact on the system\'s performance. The 133-8434-001 is a type of RF connector used for applications where high frequencies are transmitted. This article will discuss the applications and working principles of the 133-8434-001.

Application Field

The 133-8434-001 connector is suitable for use in communications systems operating in the 0.7 to 6 GHz frequency range. It is particularly useful for applications where the amount of signal loss is minimized and physical space is limited. Examples of applications where the 133-8434-001 may be suitable include Wi-Fi systems, HF radios, digital satellite receivers, radio transmitters and some military communications systems. The 133-8434-001 is also commonly used in the automotive industry, particularly with car stereo systems.

The 133-8434-001 is a 50 Ohm connector, with a maximum power rating of 1 kilowatt (kW). It is a compact connector, designed to fit into tight spaces. It features snap-on retention, allowing it to be securely attached. It is also designed to reduce signal loss and interference, and its low-voltage contact system ensures reliable connections.

Working Principle

The 133-8434-001 connector employs a standard male-female connection. The male end has a series of pins, while the female end has a corresponding series of receptacles. When the two ends are connected, the pins and receptacles form a tight electrical connection. It is important to note that the 133-8434-001 is designed as a single-ended connector, meaning that only one of the two mating connectors contains the pins.

The 133-8434-001 features a center pin and ground sleeve design. The center pin provides a low-impedance electrical path for the signal, while the ground sleeve provides a means to ground the system. This combination makes the 133-8434-001 an excellent choice for high-impedance, high-frequency applications.

The 133-8434-001 is a robust connector and is usually built to withstand up to 500 mating cycles. The connectors are also designed to operate at temperatures between -55°C and 125°C. Finally, the connectors are designed to meet various environmental standards, including IP50 for dust and water resistance.

Conclusion

The 133-8434-001 is a high-frequency connector designed for use in a variety of applications. It is designed to provide a reliable connection and minimal loss of signal. The connector is suitable for use in a range of frequencies from 0.7 to 6 GHz. It is also robust and suitable for up to 500 mating cycles. Finally, it is designed to operate in a wide range of temperatures and meet various environmental standards.