1330-58G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, also known as coils, chokes or simply inductors, are electrical devices that are designed to store energy in the form of a magnetic field. This category of electronic components is characterized by an inductance value that does not vary significantly with respect to the applied voltage or current. Inductors are widely used in electronics and electrical engineering, and are essential for the construction of electronic circuits.

The 1330-58G is a particular type of fixed inductor in the form of a chip. It is made up of an external metal case that houses a metal coil. The coil contains metal wires that are wound around a core. The core is made of a material such as ferrite or iron and is covered in an insulator material to prevent electric current from travelling between adjacent wires. This ensures that only the intended magnetic field is produced and that no cross-talk or electromagnetic interference is generated. The inductance of the 1330-58G is approximately 5.8uH, and it is designed for use in low-voltage applications.

The 1330-58G is commonly used in applications such as radio frequency circuits, impedance matching, DC-DC converters, and many other applications where an inductor is necessary to store or filter energy. In radio frequency circuits, the 1330-58G can be used to adjust the frequency of the oscillator circuit. This can be done by varying the inductance of the 1330-58G to achieve the desired resonance frequency. The 1330-58G can also be used as an impedance matching network, where the inductance can be adjusted to match the impedance of the circuit at a certain frequency. This allows for maximum signal transfer.

The working principle of the 1330-58G is quite straightforward. When a voltage is applied to the device, a current flows through the metal coil. This current produces a magnetic field around the coil which in turn stores energy in the form of a magnetic field. The amount of energy that is stored depends on the inductance of the device. When the current is removed, the magnetic field collapses which causes the stored energy to be released in the form of a voltage. This voltage can then be used to power other circuits.

The 1330-58G is a versatile and reliable inductive component that has a wide range of applications due to its high level of performance and flexibility. Its main purpose is to store and release energy in the form of a magnetic field, but it can also be used for impedance matching, RF circuits, and many other applications. Therefore, it can be concluded that the 1330-58G is an excellent choice for any application where an inductor is needed.

The specific data is subject to PDF, and the above content is for reference