1330-60F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components used in many types of electrical systems for a wide variety of applications. The 1330-60F inductor is a fixed type of inductor that is used for applications such as filters, oscillators, and voltage regulators. This article will provide information about the 1330-60F application field and working principle.

Introduction

The 1330-60F is a fixed inductor manufactured by Bourns Corporation, one of the world\'s leading manufacturers of electronic components. It is an epoxy-clad inductor designed for use in power supply applications. The 1330-60F has a maximum inductance of 60 microhenries (uH) and a current rating of 13A. The inductor has an operating temperature range of -55°C to +105°C and a DC resistance of 0.032 Ohms. The device comes in an axially leaded package with a pin pitch of 2.5mm and a rated lifetime of 2,000 hours. The 1330-60F is a fixed inductor designed for use in a wide range of applications, including power supply systems, filters, oscillators, voltage regulators, and more.

Application Fields of the 1330-60F

The 1330-60F has a variety of application fields. In power supply systems, it is often used as a choke inductor to reduce the current ripple caused by the switching of transistors. Choke inductors are devices that store and release energy, providing a smooth current flow in power supplies. The 1330-60F can also be used as a filter inductor, which helps reduce noise and improve the output voltage of power supplies. It can also be used as an oscillator inductor to control the frequency of oscillators used in systems such as frequency counters and AM radios. Finally, the 1330-60F can also be used as a voltage regulator inductor, helping to maintain a steady voltage output in power supply systems.

Working Principle of the 1330-60F

The 1330-60F is a passive device that works using the principles of electromagnetic induction. When current flows through the inductor, it produces an electromagnetic field that then induces a current in the coil. The strength of the current induced in the coil is proportional to the strength of the magnetic field and the rate at which the current changes. The 1330-60F uses this principle to store and release energy in power supply systems. When a current passes through the inductor, it stores energy in the form of a magnetic field, which is then released back into the circuit when the current stops flowing. This helps reduce noise and maintain a steady voltage output in power supply systems.

Conclusion

The 1330-60F is a fixed inductor designed for use in power supply systems, filters, oscillators, and voltage regulators. It is a passive device that works on the principle of electromagnetic induction, storing and releasing energy in power supply systems. The 1330-60F is a high-quality and reliable component that is well-suited for a variety of applications.

The specific data is subject to PDF, and the above content is for reference